I installed a pair of Pilot PL-360c foglights and used a remote wiring harness from APC. The lights come on but only stay on for about 20 seconds before they shut off. Anyone have any ideas how I can fix this so they stay on unless I use the remote to shut them off? Install was very easy so I doubt that was the problem but I am open to any ideas at this point.

 

This is what I heard from APC:

Well with the kit, it stays on for 20 sec then shuts off because it works like a car finder feature. You will still need the manual type switch inside the vehicle to turn the lights on for normal driving. I have attached a diagram on how to do that.

Anyone have any ideas?