Lock-Unlock wires location

Thread Tools
 
Search this Thread
 
Old Sep 19, 2003 | 11:37 PM
  #1  
Proud Veteran's Avatar
Thread Starter
|
Junior Member
Joined: Sep 2003
Posts: 7
Likes: 0
Question Lock-Unlock wires location

Are they in the drivers kick panel or passenger side?
 
Reply
Old Sep 20, 2003 | 02:27 AM
  #2  
SSCULLY's Avatar
Technical Article Contributor
Joined: Jun 2002
Posts: 10,511
Likes: 10
From: Under the flightpath of old ORD 22R
For the "main" button, or the power to the individual switches ?

The reason I ask, I don't know if you are looking for the control / switch lead or the power to the system.

It starts up behind the fuse box as a common point, maybe that is what you are after ?

The truck with remote entry and / or the keypad, the unlock is the driver's door only, then all doors. This is from the GEM I think ( or the RAP / what ever the new name of it is ).

If you post which one you are looking for ( all / driver's / pass, or power ) that would be helpful.
 
Reply
Old Sep 20, 2003 | 02:42 AM
  #3  
cgorris's Avatar
Senior Member
Joined: Aug 2003
Posts: 883
Likes: 0
From: Atlanta, GA
You can get wire color codes for connecting an alarm from the following website.

www.bulldogsecurity.com

If you want the wires to connect an additional door lock actuator to you can find the pink/blk and grey wires that voltage reverse (lock and unlock respectively) in the passenger side kick right where the wires come into the truck from the doors.

You can also check out my gallery. I have pics posted of where they are in the passenger side kick.
 
Reply




All times are GMT -4. The time now is 09:18 AM.