Attention Mike Troyer
Thread Starter
|
Senior Member
Joined: May 2000
Posts: 118
Likes: 0
From: Pittsburgh PA USA
Attention Mike Troyer
Got all my problems solved that I was having. I had time to install some guages and I went out for some results. As a reminder I bought the Microtuner off you. I have a 2002 F250 4X4. Just hooked up the boost gauge. With the Off Road program from the Microtuner on I see 20 psi.
I see about 15 psi at 2500 RPM's. Only other mod is Dynamax downpipe exhaust system. I have the stock downpipe and air filter. I'm seeing EGT's around 1000. It's plumbed right after the driver side exhaust header.
HOW THE HELL ARE GUYS SEEING 28-30 PSI? Many on the Ford-diesel.com site are seeing these numbers with little mods done. Any thoughts?
Dave King
I see about 15 psi at 2500 RPM's. Only other mod is Dynamax downpipe exhaust system. I have the stock downpipe and air filter. I'm seeing EGT's around 1000. It's plumbed right after the driver side exhaust header.
HOW THE HELL ARE GUYS SEEING 28-30 PSI? Many on the Ford-diesel.com site are seeing these numbers with little mods done. Any thoughts?
Dave King
Former Sponsor
Joined: Mar 1998
Posts: 13,385
Likes: 4
From: Virginia
Hi Dave,
Good to see you again!
Give us a call when you get a chance and we'll can go over all of this in detail with you.
To actually get a true 28+ PSI requires more than just a Micro Tuner and part of an exhaust, it requries all of the modifications we have gone over before in our discussions and then some.
Talk to you soon!
Good to see you again!
Give us a call when you get a chance and we'll can go over all of this in detail with you.
To actually get a true 28+ PSI requires more than just a Micro Tuner and part of an exhaust, it requries all of the modifications we have gone over before in our discussions and then some.
Talk to you soon!
