Edge/Gryphon for 09-10 TCM support
Thread Starter
|
Senior Member
Joined: Nov 2009
Posts: 1,712
Likes: 1
From: NC
Edge/Gryphon for 09-10 TCM support
Had this conversation with Bill (PHP):
Looks like maybe our patience will finally pay off.
Anyway, just an FYI.
Me: But the CS and CTS don't support the transmission control module (yet), right Bill?
Any word on when?
Bill: The support for the TCM is finished and in final testing. No specific date, but I got the impression it would be available in the next few days.
Me: Great news Bill! But (as you can imagine) I have a few questions.
How is PHP going to handle us early CS/CTS buyers with custom tunes?
Upload new/revised custom tunes?
Will there be a firmware and/or software update to allow user adjustments of shift and lock-up RPMs?
Bill: We will have to see how everything goes once the updates are available. We'll be handling current owners with revised downloads. This will obviously take a little time so we do ask that our customers be a little patient with the updates as we work through them.
The updates will be in the form of a standard Fusion firmware and calibration update. Once the main update is complete, we'll be able to upload any custom calibration updates.
Take care.
Any word on when?
Bill: The support for the TCM is finished and in final testing. No specific date, but I got the impression it would be available in the next few days.
Me: Great news Bill! But (as you can imagine) I have a few questions.
How is PHP going to handle us early CS/CTS buyers with custom tunes?
Upload new/revised custom tunes?
Will there be a firmware and/or software update to allow user adjustments of shift and lock-up RPMs?
Bill: We will have to see how everything goes once the updates are available. We'll be handling current owners with revised downloads. This will obviously take a little time so we do ask that our customers be a little patient with the updates as we work through them.
The updates will be in the form of a standard Fusion firmware and calibration update. Once the main update is complete, we'll be able to upload any custom calibration updates.
Take care.
Anyway, just an FYI.
Senior Member
Joined: Apr 2010
Posts: 689
Likes: 0
From: San Marcos, TX
I wouldn't hold my breath on it though. Last time they started telling people they were in final testing stages it still took a while for the programmers to actually come out.
Member
Joined: Sep 2008
Posts: 21
Likes: 0
From: S. FL
Any new news? Also was there any talk about TCM mods that will alow locking the rear axel with out getting the raptor TCM? and adjusting the speed that they will unlock at? Now that would be great! only have to buy the raptor 4x4 s/w.
Thread Starter
|
Senior Member
Joined: Nov 2009
Posts: 1,712
Likes: 1
From: NC
No update (as stated above, I wouldn't hold my breath).
The rear locker has never been discussed. If you're curious, call Edge and/or PHP and ask.
The rear locker has never been discussed. If you're curious, call Edge and/or PHP and ask.
Trending Topics
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Good glad to hear!