I'm running a 07 f150 4.6 and I was wondering if someone could help me out with the custom tunes....I programed it on lvl 3 and set my tires n gear ratio, rev. limiter and speed limiter and left everything else untouched(tranny and WOT settings). Now before trying to figure it out and blowing stuff I was hoping someone else had an edge in a 4.6 and could tell me how he's running it! Hoping to get the best performance out of it without being hard on it...noob I am sorry!!!!THNX FOR ANY HELP!!!!!

Side question lol....When I first put it in my truck(after doing the updates) when I programed it and went out for a test drive I didn't even make it down the street the truck wasup....running like if the timing wasn't right or something and it freaked me out soo I stoped the truck programed it again than it was ok but it did it again later and the same thing! I filled it up with supreme and added octane 2 it(before programing of course)....just don't know what did that but it never did that with my old superchips and not really looking forward to seeing that again

 

hey i am running an edge on my 07 4.6 been on for about 2 months now love it have not had any problems here are my settings

LVL3
WOT Fuel 1.5
WOT shifts
1-2 5300 2-3 5300 3-4 4800
shift firmness
1-2 12+ 2-3 12 3-4 i just left alone but a lot of people put a +9
rev limiter 5700
Tourque convert setting all parameters maxed out positively for lock and unlock

 

It's that torque converter and that bunch of shift points that I'm not sure of....don't want 2 ******* up ANYTHING....it cost me enough 4 now lol!!!!

 

i got all of what i have set from on my Edge Jack (JackandJanet)he said that the settings i have look fine and should not hurt anything
i did not want to mess around with the torque converter settings at fist either until i was sure there would be no ill effects and everthing has been smooth sailing with my edge since i got it

 

My setting's are the same as yours exept 4 the torque conv.....and your saying to max em out + and it's running good? And also is there something that I should not do and did u change the WOT fuel setting?

 

i am pretty sure that my WOT fuel setting are at either 1.00 or 1.5 i can check and let u know for sure tomorrow

on the Tourqe converter read this https://www.f150online.com/forums/ch...-settings.html this is my thread on it
EDIT:
and it is running good with everything maxed out no issues
as far as some things you don't wanna do don't got over 5300 maybe 5400 on the WOT shift and don't go over 4800-4900 on the WOT shift on 3-4 and at least
400 rpm difference between the WOT shift rpm and the max rpm

 

Thanks man....I appreciate your time and knowledge lol!!!!!Let me know 2morow and by the way has your truck ever do what mine did????It was really like if the truck was gonna stall as soon as I accelerate and tried 2 figure out what setting I was touching 4 it 2 do that and couldn't figure it out!!!

 

not i don't think my has ever done that at least not that i recall
the only problems i have had were the transmission needing a rebuild dont really know why took it in for a shudder and they told me i needed a new transmission and rear end not EDGE related had it happen b4 the Edge was ever installed or purchased

i think my Transmission had a problem with it from the factory :o it just took some time for it to be noticeable along with how low of miles it had on my truck 25000 at the time

thank you warranty

i will be sure to let you know on my WOT Fuel tomorrow

no problem any time

 

I had the tranny rebuilt at 20k also!!!!now I have 60k and it's runnin' better than ever!!!!

 

i just confirmed my WOT Fuel is indeed set a 1.50 and no problems so you should be fine settings yours at that

 

I called tech support today and something is obviously wrong(no joke)....the retrieved info with fusion and some engineer is gonna take a look at it 2morow morning!!!!!

 

It does the same weird boggin on lvl 1 and there's basicly nothing changed and no custom tunes....I really think I'm gonna film this and post it 4 u 2 see....it's almost scary the way the truck runs!!!

 

I've stayed out of this up to now because frankly, I have no idea what's causing your problem! But - you've taken the right step by calling Edge Tech Support. I feel confident they will get you fixed up pretty quickly!

- Jack

 

WOW ya i video would be nice of what it is doing so it does this with out changing any of the setting just leaving the canned tunes stock?? that is strange is there a way to unupdate you Edge maybe there was a problem with the most recent update??

 

I called customer support again 2day and the engineer was still working on the case but I've experimented a bit with the tuner and it does thins even on lvl 1 and really don't understand what is causing this.....I noticed that when I set it on lvl 3 as soon as I set the gear ratio or the tires(nothing is ever constant) but thats whats causing it 2 bug out but anyways it kinda sucks buying a tuner like this and not being able to use it but I haven't lost hope in edge just yet!!!! I film it 2 day and hopefuly show you this l8er on 2day!!!!!