I've looked at every parameter to display and found that I watch these four the most.

1) ECT (engine coolant temperature) – Degrees F.
2) TFT (transmission fluid temperature) – Degrees F.
3) LOAD (engine load %) – Percentage of total power available being
used by the engine.
4) IMPG (instant miles per gallon) – MPG of your vehicle at that instant
without average that value with past MPG

 

I'm showing ECT, EOT, TFT and i cant remember the 4th I theink MPH but im not sure.

 

Had this for a while:
RPM ECT
ComGear TFT

Trying this now:
AvgMPG IMPG
ComGear TFT

 

Engine temp, tranny temp, volts, and mph.

 

mph. rpm. tranny temp. instant mpg.

 

how do i get my edge to show the mpg???

 

rpm, average mpg, transmission temp., cylinder head temp.

hit the menu button, go to setup, then display and choose a layout, then select the one that you want to replace with mpg, hit enter then choose either instant mpg or average mpg.

 

RPM, MPH, AVG MPG, and Engine Load.

 

I wanted to show Engine Oil temp (EOT?) but it would never show a value? Anyone get this to show?
BUt anyhow I have: Avg Mpg, Instant Mpg, ECT, TCT

 

Yes, I ran it for awhile. The oil temp stays very close to the engine temp, so I went to something more useful. I think I remember that Ford eliminated the oil temp sensor.

 

RPM's, MPH, ECT,TFT

 

I just watch the turbine revs.

 

Do they have one for the Beer temp?

 

CHT, TFT, MPH, AMPG

Pulled my 6x10 enclosed tailer with 2 bikes & loaded with gear on our first 100+ mile one way trip this weekend. Trans temp never saw over 170 pulling in overdrive average around 80 mph. (we were late) Actually got about 15 mpg at those speeds too.

 

great idea!!!