Pulled this off Troyer's site

"Go to the passenger side of the vehicle, open the front door, and then look in the front part of the door frame, in the general area of the door hinges. There you should find a small sticker that has 3 letters followed by 1 number on it, that is your computer code. Note: Do not use the information from the sticker on the back of the Driver’s door that says “Calibration” on it, that is NOT the code."

 

True, however the computer might have been reflashed; thus it would have a different code then the one on the door or the PCM sticker. The only way to truly find out is to get the hex number read by a scanner (like the Edge, or an XCal) .

 

I have the edge and can get the hex number. Would someone on here be able to tell me what it is then?

 

Call Anita at Troyer's shop (or email her). Give her the hex number and she'll tell you what the 4-letter/digit code is.

 

Any one got there email. My hex is CNAB0D6.HEX. But get this i was able to look down along the firewall and see the back *** of the PCM and that sticker was clear as day. IT read NLK2. But now im worried after finding it dutct taped in. I wondering if it got reflashed in the past b4 me. I would like to talk to tp and see if the hex and my code match.

 

sales@troyerperformance.com

 

Well thanks curio on the code. They match so im good to go. Just need to talk to mike and get exacttly what i want straightned out.

 

 

Hey twintips they were able to tell from the hex file from the edge huh.
I think i still have mine wrote down somewhere,i would feel better if i knew mine matched my COMP code.....before it's to late!!!

 

.Yeah i just emailed it to her and she wrote me back in a matter of ten min. or so. Maybe me feal a bit better. Now at least i know that the sticker and the hex match. For records there is also a sticker on the firewall right on the pcm. I found this while chasing another problem today with a low voltage.