Evolution set-up

Thread Tools
 
Search this Thread
 
Old Jul 11, 2007 | 03:25 PM
  #1  
skidder1972's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2007
Posts: 4
Likes: 0
Evolution set-up

Hey guys!
I notice that many of you are using the Edge Evolotion. Can anyone recommend a good custom set up for me. I mainly use power level 2. I tow my 20 foot boat often. I have a set of 33's underneath with no other mods done. I am looking for good all around performance, better gas mil. etc. any help would be great
Thank you in advance.
 
Reply
Old Jul 11, 2007 | 04:42 PM
  #2  
Ftruck05's Avatar
Suspended
Joined: Sep 2006
Posts: 1,200
Likes: 0
From: Algonquin Il
https://www.f150online.com/forums/sh...=edge+settings
 
Reply
Old Jul 11, 2007 | 08:57 PM
  #3  
G-NOTE's Avatar
Senior Member
Joined: Oct 2006
Posts: 116
Likes: 0
From: HOUSTON, TX
Red face

I don't know about these settings listed in the previous post, I have more radical settings on my 07' and 30k on the odometer with NO PROBLEMS!!!

Custom Tune LEVEL 2 Tow
WOT SHIFT > 1-2 = 5500rpm 2-3 = 5400rpm 3-4 = 5200rpm
WOT FIRMNESS > 1-2 = +20 2-3 = +15 3-4 = +10
Rev limiter 5600rpm
2.00 WOT Fuel
130 Speed Limiter
NO Idle Advance
NO Timing Advance


Like the calibration engineer at Edge said:

I admit that it is extremely difficult to strike that balance of being able to give the end users some flexibility and NOT giving them enough to hang themselves.
So if mine blows up, Oh Well...
 
Reply
Old Jul 11, 2007 | 09:37 PM
  #4  
Kevin24's Avatar
Senior Member
Joined: Feb 2007
Posts: 1,627
Likes: 0
From: South Carolina
I would not do those settings^^^^^on a 97-03.It is way to harsh for the tranny and the shift points are higher than i would go also.

What year truck do you have skidder??
 
Reply
Old Jul 12, 2007 | 09:27 AM
  #5  
skidder1972's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2007
Posts: 4
Likes: 0
Sorry, I have a 2005 truck
 
Reply
Old Jul 12, 2007 | 09:47 AM
  #6  
skidder1972's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2007
Posts: 4
Likes: 0
Thumbs up

And thanks for the help. I will try some of these recommendations later today!
 
Reply




All times are GMT -4. The time now is 06:26 PM.