call out to openclasspro#11

Old Nov 18, 2004 | 06:44 PM
  #1  
bonefish's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2004
Posts: 238
Likes: 0
From: Florida
call out to openclasspro#11

I have been talking to Mike from Troyerperfrmance (really cool guy) about the 1715 tuner and the new xcalibrator. He had said that you did some test using both tuners. My question is... What did your test determine? I am looking for a little more pick up in my pickup. I do the occasional towing and I am not looking to drag race anyone (as I have a 4x4 w/ a 4.6). I am simply looking for some extra HP. Which would be my best bet. I do not plan on adding any other mods besides the air force intake and the tuner. Thanks for the help.
bonefish
 
Reply
Old Nov 18, 2004 | 09:43 PM
  #2  
openclasspro#11's Avatar
Senior Member
Joined: Aug 2004
Posts: 2,824
Likes: 0
From: North Huntingdon,Pa.
ok

i had 03 5.4 f150 supercab 3.55- mac air inatke- magnaflow 3" ss 15609 single catback- first i had diablo chip- dynoed 2220 rwhp at 4300 rpms- hit speed limiter which SHOULD HAVE BEEN MOVED UP! torque was 300 ft lbs at 3800 rpms- on a mustang loaded style dyno- when i went to track it had 1/4 tank of gas 50 degree temp low humidity- ran around 16.7ish- when i had 9100 tuner in i went back to track- full tank of gas near or at 90 degrees and high hum idity-think i ran high 16.1 or low 16.2- no tire spin ther days- do a search by openclasspro-my other screenname around last summer- plenty of info- mike is a genius when tuning fords-PERIOD!`
 
Reply
Old Nov 18, 2004 | 09:51 PM
  #3  
openclasspro#11's Avatar
Senior Member
Joined: Aug 2004
Posts: 2,824
Likes: 0
From: North Huntingdon,Pa.
post

post is which is best diablosport ,superchips 1715, superchips9100 i had all 3-phil
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:32 PM.