New toy!
#1
New toy!
I got it mainly for tight places. Just something i've wanted to buy for a while. I have impulse purchase problems lol
I got it mainly for recessed panels on vipers, side skirts, etc. It's the DA version i probably buy the 'rotary' version sometime just to have it.
I paid 200 for the whole kit.
#4
#7
I was just about to ask the same question. Northen tools has some Mini polishers but I rather get everything together. I would love to pick it up local if possible too. Theres also a lot of sand/polisher combos. 1badstx can you please give us the part #, there is a Blue point tool up the block from me but there web site is down.
Last edited by 05supercrew; 05-21-2009 at 11:03 AM.
Trending Topics
#9
05 the at403 is a normal polisher
at402 is a DA.
I got the DA for now, and i'm very pleased with it. Eventually i'll get the at403 too just to have it
pmason I used the backing plate it came with, with 4 inch ccs pads. Eventually i'm getting flat 4 inch pads from detailed image when i do another big order because i can't stand these dimples
The manual says 6.2 bar @ 90 psi
I run mine off this http://www.craftsman.com/shc/s/p_101...+%26+inflators and it keeps up.
at402 is a DA.
I got the DA for now, and i'm very pleased with it. Eventually i'll get the at403 too just to have it
pmason I used the backing plate it came with, with 4 inch ccs pads. Eventually i'm getting flat 4 inch pads from detailed image when i do another big order because i can't stand these dimples
The manual says 6.2 bar @ 90 psi
I run mine off this http://www.craftsman.com/shc/s/p_101...+%26+inflators and it keeps up.
#10
05 the at403 is a normal polisher
at402 is a DA.
I got the DA for now, and i'm very pleased with it. Eventually i'll get the at403 too just to have it
pmason I used the backing plate it came with, with 4 inch ccs pads. Eventually i'm getting flat 4 inch pads from detailed image when i do another big order because i can't stand these dimples
The manual says 6.2 bar @ 90 psi
I run mine off this http://www.craftsman.com/shc/s/p_101...+%26+inflators and it keeps up.
at402 is a DA.
I got the DA for now, and i'm very pleased with it. Eventually i'll get the at403 too just to have it
pmason I used the backing plate it came with, with 4 inch ccs pads. Eventually i'm getting flat 4 inch pads from detailed image when i do another big order because i can't stand these dimples
The manual says 6.2 bar @ 90 psi
I run mine off this http://www.craftsman.com/shc/s/p_101...+%26+inflators and it keeps up.
#11
I just ordered this one and will have it tues-wed.
http://www.toolbarn.com/product/ingersollrand/3129K/
http://www.toolbarn.com/product/ingersollrand/3129K/