New toy!
https://i336.photobucket.com/albums/...9/IMG_0090.jpg
https://i336.photobucket.com/albums/...9/IMG_0089.jpg https://i336.photobucket.com/albums/...9/IMG_0091.jpg https://i336.photobucket.com/albums/...9/IMG_0092.jpg I got it mainly for tight places. Just something i've wanted to buy for a while. I have impulse purchase problems lol I got it mainly for recessed panels on vipers, side skirts, etc. It's the DA version i probably buy the 'rotary' version sometime just to have it. I paid 200 for the whole kit. :beers: |
Have I seen this somewhere else? :lol: Like at TDC? :)
|
Ive been looking to pick one up.
|
Originally Posted by 05supercrew
(Post 3733818)
Ive been looking to pick one up.
Just make sure you got a decent air compressor to run it. I could polish about a panel before mine kicked on. |
I have a decent one, I have to definitly get this.
|
Where can I find this? and does it come with everything or will I need to purchase something else.
|
Originally Posted by pmason718
(Post 3734640)
Where can I find this? and does it come with everything or will I need to purchase something else.
|
I think I might have found it.
http://buy1.snapon.com/catalog/item....re&dir=catalog |
05 the at403 is a normal polisher
at402 is a DA. I got the DA for now, and i'm very pleased with it. Eventually i'll get the at403 too just to have it :lol: pmason I used the backing plate it came with, with 4 inch ccs pads. Eventually i'm getting flat 4 inch pads from detailed image when i do another big order because i can't stand these dimples :rolleyes: The manual says 6.2 bar @ 90 psi :fyi: I run mine off this http://www.craftsman.com/shc/s/p_101...+%26+inflators and it keeps up. |
Originally Posted by 1badstx
(Post 3735103)
05 the at403 is a normal polisher
at402 is a DA. I got the DA for now, and i'm very pleased with it. Eventually i'll get the at403 too just to have it :lol: pmason I used the backing plate it came with, with 4 inch ccs pads. Eventually i'm getting flat 4 inch pads from detailed image when i do another big order because i can't stand these dimples :rolleyes: The manual says 6.2 bar @ 90 psi :fyi: I run mine off this http://www.craftsman.com/shc/s/p_101...+%26+inflators and it keeps up. |
I just ordered this one and will have it tues-wed.
http://www.toolbarn.com/product/ingersollrand/3129K/ |
It's a good tool to have :thumbsup:
My impacts are IR and haven't had a problem with them |
Thanks, shipping says its coming in today. I need to attack my wheels with this. Thanks for starting this post it got me moving on buying this.
|
All times are GMT -4. The time now is 07:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands