I've done some searching, and the only thing I'm really finding is the Truxedo Plus. I was hoping to find a diamond plated toolbox with a tonneau.
Any help would be greatly appreciated.

 

try weatherguard i believe they make a kit for a tool box and tonneau.

 

As soon as My Bedrug arrives. I'll get you pictures of my Bedrug, Delta Pro, and Access Toolbox Edition all installed. Bedrug is susposed to arrive today.

It's susposed to fit any 20-21" wide toolbox.

http://www.agricover.com/index.php/p.../category/C31/

 

I need to get my soft tonnuea on my F250 cut down a little & fabricated to fit my diamond plate box. Would be way easier to have that box in there lol

 

Access Toolbox Edition Tonneau

 

Does that combo stay sealed up pretty good? This is the setup I'm going with, one day.

 

With the combo I have, I do need to plug a few holes that shouldn't be there if I didn't have the Bedrug. The cover comes with some Trail Seal for the front of the box. Not putting the seal on the front left two, one inch wide holes at the corners on the front. There are 2 other holes that are much smaller on the back side of the tool box, and where the rails go over the header bar, and the typical access triagle at the front and back bars.

Can't tell ya too much since I just installed all of it today. It should be fairly weather proof, once I fix the few holes because of the Bedrug, and put on the tailgate seal.

Oh, I didn't realize how soft the Bedrug was going to be, it's really nice.