How to Fix a Defective Window Switch
#138
I performed this service earlier today; unfortunately it did not fix my problem, but the tutorial was spot on. I proceeded to the next step in the process which is checking the wires between the cab and the drivers door, low and behold I found a broken ground wire after repairing that and since I was in the neighborhood I looked around some more and found the power wire was about to break so I repaired that as well. Bam the system works outstanding espically since I have a newly serviced switch as well. Hope this info helps the next person. BTW Ground = 12 AWG Blk, Power = 12 AWG Lt Bl / Blk. Work performed 10/30/12
Last edited by Cre8tive Sol; 10-30-2012 at 11:28 PM. Reason: time stamp
#139
#143
#147
New member, Tormil, tried to post in this thread but instead, mistakenly used the reported post button. Thought I wouild post for him what he had to share:
Thanks for the information we were close to purchasing a new window switch and most likely a regulator too. Your photos and step by step really helped us. Thanks again for helping a fellow F-150 owner.
Thanks for the information we were close to purchasing a new window switch and most likely a regulator too. Your photos and step by step really helped us. Thanks again for helping a fellow F-150 owner.
__________________
Jim
Jim
#148
#150