Last I installed my HID Kit for my headlights and fogs.

The headlights are a 55W bi-xenon kit with relay harness.

The fogs are a DDM Tuning 35w kit.

When driving tonight and testing everything I noticed the following issue.

Headlights on Hi/Low beam no problems.

When I turn on my fogs I have an issue.

My headlights jump from Lo-beam to High-beam with the logs on, and the hi-beam indicator is partially illuminated. When I level to change to Hi-beams they change like normal and the fogs turn off. If I switch back to lo-beams the fogs turn on but the hi beams still stay on.

Has anyone else seen an issue like this?

 

search "bambi mod"

 

Yup, you have to ground your fog light circuit. It's real easy and only takes a minute or two.

- NCSU

 

Here you go.

http://www.landstromsfoundry.com/Tec...Foglights.html




_

 

Thank you for the help. I didn't even know what to look for on the forums. Took me about 20 min to solder up a jumper and get all taken care of.

Everything works great!