pm sent possessed

 

UPDATE:
I'm removing my kit as well. These kits are a pain in the **** and there is always something wrong. Going back to silverstars.

 

Same thing I did

 

My DDM kit and install:

http://www.youtube.com/watch?v=8M_VC_6YccU

 

X3. Too many issues.
Back to Phillips XTreme for me.

 

I'm still running strong on my kit I purchased from them about a year ago. Don't know why everyone is having issues with them...

unless they have gone down hill since I've dealt with them...

 

I have a kit someone can have if they want. I went with Retro-Solutions, and if i can't get my drivers side resolved soon, i am going to go with Silverstars also.. or some variant off...
Really ticks me off only having one headlight working..

 

Did the bulb blow out? Or is the ballast not working?

 

how much?

 

i just purchased h13 high/low and h10 fogs. fogs installed good, and work good. heads not so good i guess i have the wrong wiring harness in my kit. the plugs for the high/low do not even go together. hopefully it will not take weeks to get this resolved. i sent them pics of the harness, but from what im hearing the customer service stinks

 

had my ddm kit for over a year .ZERO issues( knock on wood)

 

It seems DDM may have changed the manufacturer. Here's my story:

Few years ago bought a 55W slim ballast kit, worked fine for me, except Hi/Low working backwards(switch in low would result in high beams and vise versa) so I decided to go with DDM when I got my 2010 F150.

I got 2 kits in this october: 55W slim ballasts, 6000K Hi/Lo bulbs for heads and 35W slim ballasts, 4500K bulbs for fogs. Heads wired with harness, fogs wired directly plug-n-play. I was so happy....for about 2 months.

End of november temperature dips below freezing mark(-2 C) one of my headlights wouldnt turn on 30% of the time. After flicking the switch a few times it would turn on. I think ok - I can live with that...
Another 2 weeks - my right fog stops working!!!!! Switch the bulbs to check where the problem is - right side still out - ballast seem to be the problem. Call DDM - they say, they will test it,of course I would have to pay for shipping both ways. So I end up just ordering new 35W Raptor set.
So while Im waiting for the new fogs, the left fogs stops working too. F**k this!!! Changed fogs back to stock.
But that's not the end of it. So today I get my new fogs in the morning, thinking yay, I will finally have everything working.. Nope, not today. After work coming back to my truck, that was parked outside for a few hours(today was about -15 C) I find out that BOTH OF MY HEADLIGHTS are NOT WORKING!!!!!!!!!!!!!!
So I dont think I will be buying anything from DDM from now on. Sorry for lots of CAPS and long post. Just really pissed.

 

I got my ddm kit about a year ago.. they have worked flawlessly

 

Had mine for about a year and 1 of my ballasts went out a few weeks ago. Lucky for me they have a little retail store locally. Walk in they test it and walk out 5 minutes later with a new ballast

 

Starting around 2007, I've purchased 6 kits from DDM and I am happy with them, only had one slim ballast fail on the R1 and it was RMA'd quickly.