Painting 2004 Fogs.
Well after seeing Southernstyle05's fogs and a couple other photos found in various threads, such as the original Painted Headlamp Thread, I decided to do mine. I bought Justin's (Zeruin ) original black headlamps, and imo, painted headlamps look awful on the 04 - 05 rectangular fogs, especially on a chrome bumper. So I started the fog lamp painting job. I'm about to start the painting in a few moments, just giving an update, and a couple photos.
I didn't have my camera the night I started, left it at my friends house but I managed to get a web cam picture. https://i18.photobucket.com/albums/b...s/Picture2.jpg http://i18.photobucket.com/albums/b1...s/Picture1.jpg I will say this though, masking these lamps is the biggest piss off.. The backing is so sensitive you have to put each piece of tape on something cotton atleast 5 times to kill the adhesive strength, can NOT press down on it hard, and taping it in general, all those curves in that very limited amount of space, SUCKS. I know i'm going to have a couple black spots from where tape ruined a little, but it should be too bad. |
Got my camera back. Heres some resolution photos. Since last night I lightly scuffed the reflective chrome with 1000 grit.
With lens http://i18.photobucket.com/albums/b1...s/DSC03875.jpg Without http://i18.photobucket.com/albums/b1...s/DSC03877.jpg What my truck has looked like all week, has the fog holes, but no fogs, just like a ricer :lol: http://i18.photobucket.com/albums/b1...s/DSC03879.jpg |
tell me about it... that chrome will piss you off when you realize how easy it is to mess up... its all good though. DEFINITELY worth the fight!!
Caint wait to see finished pics man. Good luck, SouthernStyle |
Alright well I painted the shells yesterday ( 12/6 ) and let them dry overnight. Now they're finished, I had to touch up just minorly on the LH lamp though, so i'll let that dry the rest of the afternoon, otherwise, time to pull the tape off of the reflective backing! Heres a couple pictures of how they are now.
No flash http://i18.photobucket.com/albums/b1...s/DSC03885.jpg With flash http://i18.photobucket.com/albums/b1...s/DSC03884.jpg
Originally Posted by SouthernStyle05
(Post 3480475)
tell me about it... that chrome will piss you off when you realize how easy it is to mess up... its all good though. DEFINITELY worth the fight!!
Caint wait to see finished pics man. Good luck, SouthernStyle |
Alright well I pulled the masking tape, sadly the tape did ruin some of the reflecting backing on both lamps, mostly just at the side corners though. I did end up with a little overspray, due to not fully pressing down on the tape, but if I did that then I would have risked removing more chrome. But I was able to clean all of the overspray with a MF and UQD, to my surprize it came off and looks pretty decent now, though the corners are still ruined, Its not a big deal. They look pretty sharp. Now I just need to seal them up. Any suggestions on what type of silicone to go with? I would like to use a black colored silicon.
Passenger lamp, after unmasking. http://i18.photobucket.com/albums/b1...s/DSC03888.jpg With flash. http://i18.photobucket.com/albums/b1...s/DSC03889.jpg The minor damage http://i18.photobucket.com/albums/b1...s/DSC03890.jpg The over spray which cleaned up perfect. http://i18.photobucket.com/albums/b1...s/DSC03891.jpg |
Drivers side lamp
http://i18.photobucket.com/albums/b1...s/DSC03892.jpg The damage & a little overspray http://i18.photobucket.com/albums/b1...s/DSC03893.jpg & with the dirty lens propped on, passenger lamp. http://i18.photobucket.com/albums/b1...s/DSC03894.jpg |
SEAL THEM AND GET THEM ON
lol too much suspense im just joking around take your time they look good so far |
Originally Posted by blackf150lariat
(Post 3481038)
SEAL THEM AND GET THEM ON
lol too much suspense im just joking around take your time they look good so far |
looks awesome man. truely cant wait to see em on the truck!
yeah me passenger side lamp actually ended up perfect but the drivers side it did peel some off like in your pics, only noticible from up close though when your looking for it. well just seal em up with some "ultra black" RTV from the autozone and slap em on. later, SouthernStyle .......and you've already got it level right? Slap some 35's on this beast ASAP!!!!! haha. truck will be "RIDIN" then. haha |
Originally Posted by SouthernStyle05
(Post 3481668)
looks awesome man. truely cant wait to see em on the truck!
yeah me passenger side lamp actually ended up perfect but the drivers side it did peel some off like in your pics, only noticible from up close though when your looking for it. well just seal em up with some "ultra black" RTV from the autozone and slap em on. later, SouthernStyle .......and you've already got it level right? Slap some 35's on this beast ASAP!!!!! haha. truck will be "RIDIN" then. haha |
Man, you gotta either go chrome or NONE at all. IE chrome bumper + chrome headlights, or black headlights and NO chrome bumpers. The bumpers just look out of place with black headlights IMO.
So what to do about it? Paint them bumpers! :) |
Originally Posted by DarrenWS6
(Post 3481905)
...Would much rather buy my black 18x9s with 285/65/18 BFG TA KOs next spring :drool:
I wont push ya on it again, ok well just one last time... DUDE, go with the level and 35's. If your payin for new BFG's anyway (in the spring) then drop a couplle more bucks for the right size meats :lol:!! I promis you that you wont regret it, i absolutely love what the tires did for my truck, totally changed it!!! haha, alright i'm done. just waitin on the fog pics now man, SouthernStyle |
Alright people, the silicon is drying as we speak! Photos tomorrow after drying.
Originally Posted by mSaLL150
(Post 3481947)
Man, you gotta either go chrome or NONE at all. IE chrome bumper + chrome headlights, or black headlights and NO chrome bumpers. The bumpers just look out of place with black headlights IMO.
So what to do about it? Paint them bumpers! :)
Originally Posted by SouthernStyle05
(Post 3481964)
yeah yeah, I hear ya.
I wont push ya on it again, ok well just one last time... DUDE, go with the level and 35's. If your payin for new BFG's anyway (in the spring) then drop a couplle more bucks for the right size meats :lol:!! I promis you that you wont regret it, i absolutely love what the tires did for my truck, totally changed it!!! haha, alright i'm done. just waitin on the fog pics now man, SouthernStyle |
Nice pics! Gives me ideas on how I'm going to tape off mine when I finally get some. :lol:
|
Originally Posted by Stealth
(Post 3481968)
Nice pics! Gives me ideas on how I'm going to tape off mine when I finally get some. :lol:
|
I'm thinking of not taping as much of the reflective surface, maybe only using 1" masking tape and not taking it all the way out to the long side of the lens. From the pics, the long side has 8 reflective ribs vs the short side having 5 ribs, and making them both have 5 reflective ribs with only one piece of tape going down the center. I don't care about light output. :D
|
Hurry darren
|
Alright now, I got a little more silicon around the edges sealing so the next update they will be installed! Here they are. I cleaned and clay bared and polished the lenses, they were quite dirty to my surprise, cleaned up very very well and look much better but still show a little oxidized haze and minor scratches from 4yrs of functionality. No complaints here, i'm just happy that I will have fog lamps again tomorrow!
http://i18.photobucket.com/albums/b1...8/DSC03901.jpg This one shows a little bit of the oxidation i'm talking about, but its no big deal, only shows in flash pictures. Holding the lamps and looking into them the lenses are as clean & clear as brand new http://i18.photobucket.com/albums/b1...8/DSC03908.jpg The LH one gave me a little difficulty when gluing back on, the right side of it did not want to stay down, but I held it in place with a strap overnight and it held, so overall this job was a success, now lets hope it looks perfect and lights up good at night. http://i18.photobucket.com/albums/b1...8/DSC03903.jpg
Originally Posted by Stealth
(Post 3481979)
I'm thinking of not taping as much of the reflective surface, maybe only using 1" masking tape and not taking it all the way out to the long side of the lens. From the pics, the long side has 8 reflective ribs vs the short side having 5 ribs, and making them both have 5 reflective ribs with only one piece of tape going down the center. I don't care about light output. :D
|
where are the pics??, I'm dying from the suspense...I really want to see these...it'll let me know if I want to do them on my truck. :thumbsup:
|
Originally Posted by bjp207
(Post 3482652)
where are the pics??, I'm dying from the suspense...I really want to see these...it'll let me know if I want to do them on my truck. :thumbsup:
|
looks good... nice job
|
darren... i know they are on the truck by now!!!
where are the pics?????? i've already got the dang things and im still anxious to see what they look like on your truck! hurry man, we know you have absolutely no life outside your f1 :lol: :beers: SouthernStyle |
Originally Posted by SouthernStyle05
(Post 3483376)
darren... i know they are on the truck by now!!!
where are the pics?????? i've already got the dang things and im still anxious to see what they look like on your truck! hurry man, we know you have absolutely no life outside your f1 :lol: :beers: SouthernStyle Alright everyone here is the moment you all have been waiting for. Silicon is dry and lamps are re-installed, Heres how it looks. Corner https://i18.photobucket.com/albums/b...8/DSC03909.jpg Higher overview http://i18.photobucket.com/albums/b1...8/DSC03911.jpg Flashed http://i18.photobucket.com/albums/b1...8/DSC03913.jpg Non Flashed http://i18.photobucket.com/albums/b1...8/DSC03914.jpg |
Whole truck
http://i18.photobucket.com/albums/b1...8/DSC03915.jpg and a corner close up http://i18.photobucket.com/albums/b1...8/DSC03917.jpg So there you have it. The job was a success! |
niiiice dude, I'll probly be doing that here in the near future
|
looks good boss... job well done
great write-up!! SouthernStyle |
Originally Posted by bjp207
(Post 3483689)
niiiice dude, I'll probly be doing that here in the near future
Originally Posted by SouthernStyle05
(Post 3483981)
looks good boss... job well done
great write-up!! SouthernStyle |
all the waiting paid off :)
looks like you did a great job on them. o and btw you got some white stuff on your grille ahahah you liked them a bit to much. |
we did mine with niteshades. we painted just the lens.
http://www.supermotors.net/getfile/6...e/100_0404.jpg |
Originally Posted by blackf150lariat
(Post 3484113)
o and btw you got some white stuff on your grille ahahah you liked them a bit to much. i had noticed the white stuff but hadn't put 2 and 2 together... nice!!! :beers: SouthernStyle |
Originally Posted by blackf150lariat
(Post 3484113)
all the waiting paid off :)
looks like you did a great job on them. o and btw you got some white stuff on your grille ahahah you liked them a bit to much.
Originally Posted by *FX4TEXASGIRL*
(Post 3484665)
we did mine with niteshades. we painted just the lens.
Originally Posted by SouthernStyle05
(Post 3484756)
bbaaaaaaaaahhhhahahahahahahahaahaha.......
i had noticed the white stuff but hadn't put 2 and 2 together... nice!!! :beers: SouthernStyle |
Originally Posted by SouthernStyle05
(Post 3484756)
bbaaaaaaaaahhhhahahahahahahahaahaha.......
i had noticed the white stuff but hadn't put 2 and 2 together... nice!!! :beers: SouthernStyle :beers: what k HIDS you thinkin on ? i wish i had went 6000K :) |
VERY nice, Darren! That look matches your headlights perfectly.
One of the coolest "DIY" mods I've seen! :thumbsup: |
Originally Posted by blackf150lariat
(Post 3484974)
what k HIDS you thinkin on ?
i wish i had went 6000K :)
Originally Posted by DewserB
(Post 3485079)
VERY nice, Darren! That look matches your headlights perfectly.
One of the coolest "DIY" mods I've seen! :thumbsup: |
Originally Posted by DarrenWS6
(Post 3485101)
Thank you very much man!
Soooo.....when are you gonna powder coat them bumpers? http://i45.photobucket.com/albums/f8.../whistling.gif |
Originally Posted by DewserB
(Post 3485117)
You're welcome...nice mod!
Soooo.....when are you gonna powder coat them bumpers? http://i45.photobucket.com/albums/f8.../whistling.gif |
Awesome! Dark Torreador red I presume? I've always wondered what an all DT red truck would look like....it will look sick! DO IT! :cool:
|
Originally Posted by DewserB
(Post 3485122)
Awesome! Dark Torreador red I presume? I've always wondered what an all DT red truck would look like....it will look sick! DO IT! :cool:
Here is a photoshop of my truck that I did and would like to do, granted the original pic sucks cause its too dark and in snow, it would look great in person. https://www.f150online.com/forums/me...247-before.jpg https://www.f150online.com/forums/me...2246-after.jpg To make it look really good, my level kit needs installed, and the stock wheels & tires must go. |
Originally Posted by DarrenWS6
(Post 3485141)
https://www.f150online.com/forums/me...2246-after.jpg
To make it look really good, my level kit needs installed, and the stock wheels & tires must go. That looks even sicker than I ever imagined! LOVE IT! My opinion? A leveling kit and new, black KMC Hoss (or something like that), and some nice, oversized AT tires is all you'll need to make that look work. :thumbsup: |
Originally Posted by DewserB
(Post 3485151)
SWEET FANCY MOSES! http://i45.photobucket.com/albums/f89/dewserb/blink.gif
That looks even sicker than I ever imagined! LOVE IT! My opinion? A leveling kit and new, black KMC Hoss (or something like that), and some nice, oversized AT tires is all you'll need to make that look work. :thumbsup: |
All times are GMT -4. The time now is 10:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands