New to Forum and Have Question About Rails
Thread Starter
|
Junior Member
Joined: Dec 2006
Posts: 1
Likes: 0
New to Forum and Have Question About Rails
This is a great site. Glad I found it.
My wife just purchased a 2003 Ford F150 and she would like chrome/stainless bed rails.
We had Line-X applied to the box so here is my question.
How does one access the stake holes so hardware can be used to mount the rails?
Thanks, Bob
My wife just purchased a 2003 Ford F150 and she would like chrome/stainless bed rails.
We had Line-X applied to the box so here is my question.
How does one access the stake holes so hardware can be used to mount the rails?
Thanks, Bob
Senior Member
Joined: Sep 2006
Posts: 612
Likes: 0
From: Great White North Canada
Welcome!
You could always just get the bedrails that bolt into the side rather than the stakemounted ones... But if you were to want to do it the other way i would probably start with a chisel and hammer and finish it off with a dremel...thats a good question!
You could always just get the bedrails that bolt into the side rather than the stakemounted ones... But if you were to want to do it the other way i would probably start with a chisel and hammer and finish it off with a dremel...thats a good question!