F150online Forums

where you guys mounting your fuse holders?

Thread Tools
 
Search this Thread
 
Old Sep 14, 2007 | 01:36 PM
Share
  #1  
K1NGoftheRanch's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2006
Posts: 1,661
Likes: 0
From: Where do you live?
where you guys mounting your fuse holders?
can't find a spot to mount my 1/0 ga fuse holder in the engine bay close to the battery...thanks
 
Reply
0
Old Sep 14, 2007 | 02:24 PM
Share
  #2  
Bartak1's Avatar
Senior Member
Joined: Sep 2003
Posts: 6,760
Likes: 4
From: Nebraska
Right onto the battery cover.



Make sure your screws are short enough that you dont screw into the actual battery
 
Reply
0
Old Sep 14, 2007 | 03:13 PM
Share
  #3  
sysman_rick's Avatar
Senior Member
Joined: Sep 2006
Posts: 601
Likes: 0
From: Lexington,SC
Post
JB Weld will do the trick.
 
Reply
0
Old Sep 14, 2007 | 04:43 PM
Share
  #4  
TRITON_2002's Avatar
Senior Member
Joined: Aug 2007
Posts: 183
Likes: 0
From: S. TX
On the firewall with zip-ties
 
Reply
0
Old Sep 14, 2007 | 09:40 PM
Share
  #5  
kuruption's Avatar
Senior Member
Joined: May 2007
Posts: 390
Likes: 0
From: Chester County, PA
On battery, like bartak, except I replaced my battery with an optima yellowtop, so used some industrial strength velcro to hold it in place.

 
Reply
0
Old Oct 1, 2007 | 01:14 PM
Share
  #6  
1bad86vmax's Avatar
Senior Member
Joined: Dec 2006
Posts: 467
Likes: 2
https://www.f150online.com/galleries...623&anum=12527
 
Reply
0
Old Oct 1, 2007 | 01:41 PM
Share
  #7  
Jolly_Green_Giant's Avatar
Senior Member
Joined: Aug 1999
Posts: 1,615
Likes: 0
From: Sayre,OK,USA
Same as above on the battery cover. used some black silicone/adhesive I had arround.
 
Reply
0

Trending Topics

Old Oct 5, 2007 | 07:00 AM
Share
  #8  
Low_e_Red's Avatar
Senior Member
Joined: Apr 2007
Posts: 4,494
Likes: 0
From: Slidell, LA
Kuruption where did you put your 10W6v2's?
 
Reply
0
Old Oct 5, 2007 | 07:53 PM
Share
  #9  
kuruption's Avatar
Senior Member
Joined: May 2007
Posts: 390
Likes: 0
From: Chester County, PA
Originally Posted by Low_e_Red
Kuruption where did you put your 10W6v2's?
TBA... it's a surprise
 
Reply
0
Old Oct 7, 2007 | 07:50 PM
Share
  #10  
txag2007's Avatar
Member
Joined: Sep 2007
Posts: 25
Likes: 0
Mounted mine on top of the battery cover as well with 3M double-sided tape.

 
Reply
0
Old Nov 3, 2007 | 02:56 PM
Share
  #11  
Stephen S's Avatar
Senior Member
Joined: Apr 2001
Posts: 123
Likes: 0
From: Houston, TX
I used double sided tape and stuck the fuse holder to the top of the washer fluid reservoir. The wire is routed behind the battery to the firewall.
 
Reply
0
Back to Subforum
Amplifiers
View Next Unread
JL 5 channel VS RF 1000 limited edition amp




Advanced Search

All times are GMT -4. The time now is 12:19 PM.