i am going to be powering 3 10's pioneer premier shallow mounts 4ohms a piece in sealed seperate boxes and i was wondering what is the best brand amp for this i am looking to stay under the 250 dollar range but i need a powerful amp the 10's are 1000 watt max and 250 rms a piece is a mono amp the best to get alot of bass

 

Something around 900 watts or so at 1 ohm.

With that setup you will have to pretty much buy a mono amp...VERY VERY few two channels can be bridged and handle 1.34 ohm daily, pounding.

 

is that 900 watts rms and like 2500 max?? any oter suggestions on how to have a good system without throwing out alot of money

 

http://www.onlinecarstereo.com/CarAu...roductID=16367

Just set the gains carefully with a digital multimeter and you'll be fine

 

900 watts RMS. Max power doesnt mean squat, dont even pay attention to that number. Just a BS number thrown out there.


For a new amp with warranty, that Hifonics that Impact linked to wouldnt be a bad purchase. Not exactly a high end amp, but a VERY popular budget amp that will more than work.

 

My 9.0s max out at 5500 watts each!

 

Your the man 11,000 watts in that bad boy

 

Showoff

My Bose max's out at around 25 watts,

 

Quick!! Hide the wife and children!!!

 

I'll never see/hear that in my truck.

 

Go with the JL 1000/1 mono. It is a pricey amp, but I believe that it is 1000 watts stable between 1.5 and 4 ohms. I have one in my truck and I love it to death. In my PERSONAL opinion I believe that it is the best amp made. Nut like I said, the y are a little pricey, I was lucky enough to snag one from my buddy for $400, but I have seen them sell new in specialty audio stores for over $1200. But if you want the best you can get, then go with JL!

 

For that price I rather have zapco or USAMP AX series