Need advice/help on this set-up.
#31
#32
Originally Posted by Biteyahard
Yeah Right now I'm thinking about soldering a 3-4 inch piece of speaker wire to the speakers and then using bullet connectors at that point. Anyone ever try that or is that a waste of time? I was thinking it would make upgrading easier and still have a good connection. I guess I could just use the female quick connects but my speakers have two different sizes and the only females I have been able to find are .250
Thatd work if you cant find any of the smaller female disconnects.
I was thinking I had some of the smaller ones that I woulda gave you, but I just looked and I cant find them. Maybe I used them on something...
What outputs are on your HU? Front and Rear, Front and Sub???
What do you have for amp/s?
#33
Originally Posted by Bartak1
Thatd work if you cant find any of the smaller female disconnects.
I was thinking I had some of the smaller ones that I woulda gave you, but I just looked and I cant find them. Maybe I used them on something...
What outputs are on your HU? Front and Rear, Front and Sub???
What do you have for amp/s?
I was thinking I had some of the smaller ones that I woulda gave you, but I just looked and I cant find them. Maybe I used them on something...
What outputs are on your HU? Front and Rear, Front and Sub???
What do you have for amp/s?
#34
Aright, your going to need 2 sets of RCAs then.
One from the front HU ouputs to the Front inputs on the amp, and same for the rears on the HU and on the amp.
Then, for the 5th channel to get signal, you will probably have to use a pair of RCA splitter and hook them to your front RCAs. You should be able to get Y splitters with 2 male ends, and one female end; plug one male end into the front inputs right and the other end into the sub inputs right, then do the other with the left side of the front/sub inputs. Then plug the two female ends into the RCA cord you have running to the HUs front inputs.
One from the front HU ouputs to the Front inputs on the amp, and same for the rears on the HU and on the amp.
Then, for the 5th channel to get signal, you will probably have to use a pair of RCA splitter and hook them to your front RCAs. You should be able to get Y splitters with 2 male ends, and one female end; plug one male end into the front inputs right and the other end into the sub inputs right, then do the other with the left side of the front/sub inputs. Then plug the two female ends into the RCA cord you have running to the HUs front inputs.
#35
Hey bartak I hate to thread jack but some real quick advice if you dont mind... Ive got front and sub rca outputs on my HU. I also have a 4 channel alpine and a .1 channel mono sub amp. what is the best way to sent signals to all channels while keeping stereo sound to the 4 channel and mono sound to the sub amp?
#36
Originally Posted by BestNTx
Hey bartak I hate to thread jack but some real quick advice if you dont mind... Ive got front and sub rca outputs on my HU. I also have a 4 channel alpine and a .1 channel mono sub amp. what is the best way to sent signals to all channels while keeping stereo sound to the 4 channel and mono sound to the sub amp?
#37
Originally Posted by jmt0645
easy, use rca splitters on the front rca outs to send a stereo signal to the 4 channel amp and a single set of rca's to the mono sub amp from the sub output.
#38
Originally Posted by Bartak1
Aright, your going to need 2 sets of RCAs then.
One from the front HU ouputs to the Front inputs on the amp, and same for the rears on the HU and on the amp.
Then, for the 5th channel to get signal, you will probably have to use a pair of RCA splitter and hook them to your front RCAs. You should be able to get Y splitters with 2 male ends, and one female end; plug one male end into the front inputs right and the other end into the sub inputs right, then do the other with the left side of the front/sub inputs. Then plug the two female ends into the RCA cord you have running to the HUs front inputs.
One from the front HU ouputs to the Front inputs on the amp, and same for the rears on the HU and on the amp.
Then, for the 5th channel to get signal, you will probably have to use a pair of RCA splitter and hook them to your front RCAs. You should be able to get Y splitters with 2 male ends, and one female end; plug one male end into the front inputs right and the other end into the sub inputs right, then do the other with the left side of the front/sub inputs. Then plug the two female ends into the RCA cord you have running to the HUs front inputs.
So I would just put the splitter near the amp end? So I'll need to get two sets of splitters then? I guess I'm not done shopping after all:o
Last edited by Biteyahard; 02-20-2007 at 06:29 PM.
#39
I was thinking about this RCA cable, any opinions????http://cgi.ebay.com/ws/eBayISAPI.dll...4233&rd=1&rd=1
#40
Originally Posted by Biteyahard
I was thinking about this RCA cable, any opinions????http://cgi.ebay.com/ws/eBayISAPI.dll...4233&rd=1&rd=1
I used the same ones although mine were $15 more when I bought 'em.
#41
Originally Posted by jmt0645
Those look excellent
I used the same ones although mine were $15 more when I bought 'em.
I used the same ones although mine were $15 more when I bought 'em.
As far as splitters I'm assuming any will do as long as they have 24k tips? I want to get this stuff in hand before the weekend and getting this stuff online just delays my fun!
#42
Originally Posted by Biteyahard
Glad you said that because I bought them about an hour ago
As far as splitters I'm assuming any will do as long as they have 24k tips? I want to get this stuff in hand before the weekend and getting this stuff online just delays my fun!
As far as splitters I'm assuming any will do as long as they have 24k tips? I want to get this stuff in hand before the weekend and getting this stuff online just delays my fun!
#43
#45