Fog light switches
Senior Member
Joined: Sep 2004
Posts: 2,011
Likes: 0
From: southeastern, Virginia
That looks pretty clean. You should do a write up on it. I'm getting ready to put some off road lights on mine and I'm really dreading the wiring. I've even been looking into those remote switches just so i won't. Where did you get your switches.
Thread Starter
|
Senior Member
Joined: Sep 2009
Posts: 130
Likes: 0
The cubby hole is a waste. I got a piece of blank OEM plastic from Scoche($4) and removed the metal panel and epoxied the blank over the space. Would never know since it is the exact same panel as rest of the dash. Using a Dremmel allows you to make whatever openings you wish to mount switches or gauge, clock etc. Would be perfect for an Edge programmer. Anyway, the rockers are from OTRATTW .
Last edited by drswiger; Feb 24, 2013 at 02:21 PM.
Member
Joined: Dec 2005
Posts: 28
Likes: 0
From: Bixby, Ok.
I did something similar,I don't have a TBC so I used it's cubby,I put my 2 switchs for my lights and a mute button for my Escort 9500i. I used some aluminum for mine, the cubby is still there, I just crimped it over the edges of the cubby, that way I can still put a TBC on the truck if needed.
Last edited by okgearhead; Feb 25, 2013 at 11:13 AM.
