HELP: Identify part and where it belongs
HELP: Identify part and where it belongs
Particulars -
*Identification on the top is:


*The inside top has a 2 stamped on it. The curved portion of the part fits / mates-to something that is cylindrical and has a 1¼" diameter (approximate measurement).I've been to the local FoMoCo dealership service and parts departments and 
Any assistance would be appreciated.
Sorry ... No cash prizes or awards. Just a (virtual) hearty handshake and a pat on the back ( which sure beats a slap in the belly with a wet trout ).
.
- 4.6L 3V
- RH ( passenger ) side of the engine.
- in the area between the intake and valve cover.
- near the COP / fuel injector of the #1 cylinder.

*Identification on the top is:
CSA
>PA66-GF33<
Though a Google indicates that it's just a type of black plastic designation.>PA66-GF33<


*The inside top has a 2 stamped on it. The curved portion of the part fits / mates-to something that is cylindrical and has a 1¼" diameter (approximate measurement).

Any assistance would be appreciated.
Sorry ... No cash prizes or awards. Just a (virtual) hearty handshake and a pat on the back ( which sure beats a slap in the belly with a wet trout ).

.
Yes, good work Mike. Good pic and we all learned something.
Good thing too, cuz this is the kinda thread that would end up having 100 "guesses" by the experts, all blowing smoke out their ****.
Thanks
Good thing too, cuz this is the kinda thread that would end up having 100 "guesses" by the experts, all blowing smoke out their ****.
Thanks
Trending Topics
Mike99a - There ya go...The gear clamp over the yellow line...the plastic black cover goes over that guy.
< pic' >
< pic' >
Geesh ... I was frettin' over a clamp cover.
.



