Tailgate handle camera
Member
Joined: Dec 2007
Posts: 30
Likes: 0
I just completed installing an OEM Tailgate handle camera into my 2007 XLT. I used the information from the Mega-Thread under the 2009 forums, my differences were this:
1. I bought the headliner harness from Ford to get the OEM mirror connector, not available anywhere.
2. I ran the lines down the driver side A-pillar to take advantage of the body through grommet under the drivers foot area.
3. The reverse sense line is by the driver side sill (black w/pink)
4. tied the output of the mirror compass into my OEM instrument cluster readout, worked beautifully. I'm starting or replying to a compass thread to give the pinout/diagram for the 2007 XLT compass module.
1. I bought the headliner harness from Ford to get the OEM mirror connector, not available anywhere.
2. I ran the lines down the driver side A-pillar to take advantage of the body through grommet under the drivers foot area.
3. The reverse sense line is by the driver side sill (black w/pink)
4. tied the output of the mirror compass into my OEM instrument cluster readout, worked beautifully. I'm starting or replying to a compass thread to give the pinout/diagram for the 2007 XLT compass module.