2007 F-150 XLT build up
#46
01-27-2011, 06:16 PM
Join Date: Dec 2010
Location: Currently in **** hole afghanistan
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
#47
01-27-2011, 06:17 PM
Join Date: Sep 2009
Location: Bluffton, SC
Posts: 2,178
Likes: 0
Received 0 Likes
on
0 Posts
#48
01-27-2011, 06:39 PM
Join Date: Dec 2010
Location: Currently in **** hole afghanistan
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
#49
02-07-2011, 09:06 PM
Join Date: Dec 2010
Location: Currently in **** hole afghanistan
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
#50
02-07-2011, 10:04 PM
#51
02-07-2011, 11:10 PM
Senior Member
Join Date: Jan 2007
Location: Marysville, Washington
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
#52
02-08-2011, 11:52 AM
Join Date: Dec 2010
Location: Currently in **** hole afghanistan
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
yup not bad at all i was shocked to see my mileage above 250 and no empty light yet
although I do throw the truck in neutral down big hills
so that helps out a lot crusing at 600 RPMS and 60 mph
although I do throw the truck in neutral down big hills
so that helps out a lot crusing at 600 RPMS and 60 mph
#53
02-08-2011, 07:27 PM
#55
02-09-2011, 06:18 PM
Join Date: Dec 2010
Location: Currently in **** hole afghanistan
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
just the Edge CTS canned tunes but getting custom tunes very soon thru PHP
#57
02-09-2011, 11:39 PM
Senior Member
Join Date: Feb 2008
Location: Fairbanks, Alaska
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
#58
02-10-2011, 02:30 PM
Senior Member
Join Date: Apr 2005
Location: Texas
Posts: 581
Likes: 0
Received 0 Likes
on
0 Posts
much thanks to my buddy Richard helping me without him I wouldn't have been able to do this - I ended up only having to pay the shop $81 to rent the lift and use the machine to mount and balance my tires -
holy cow did the front end take so damn long! what killed us was the rear cross member bracket needed to be cut more to clear the Front diff - so we had to remove and cut and drill more - holy crap! after 14 hours of hard labor - finally got it all done -
I ended up doing the mount and balance myself and that was a pain in the *** since the tires are so DAMN heavy - also had to use tons of sticky weight on the inside of the rim to balance it- a few tires where in good shape and only used 1.75/1.00 oz but one tire was WAY off.
front end taken off minus steering rack
[IMG]http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs265.snc6/179310_10150089951544026_796304025_6016090_6720395 _n.jpg[
/IMG]
done w the front minus the alignment
sitting next to a tundra w/ 3" leveling kit and 33' tires
figure I **** off some liberals here in NY - my anti obama sticker is going on the bumper - sorry folks I am a true conservative from the south
holy cow did the front end take so damn long! what killed us was the rear cross member bracket needed to be cut more to clear the Front diff - so we had to remove and cut and drill more - holy crap! after 14 hours of hard labor - finally got it all done -
I ended up doing the mount and balance myself and that was a pain in the *** since the tires are so DAMN heavy - also had to use tons of sticky weight on the inside of the rim to balance it- a few tires where in good shape and only used 1.75/1.00 oz but one tire was WAY off.
front end taken off minus steering rack
[IMG]http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs265.snc6/179310_10150089951544026_796304025_6016090_6720395 _n.jpg[
/IMG]
done w the front minus the alignment
sitting next to a tundra w/ 3" leveling kit and 33' tires
figure I **** off some liberals here in NY - my anti obama sticker is going on the bumper - sorry folks I am a true conservative from the south
THAT STICKER ROCKS....+2 for the troops..
