2004 - 2008 F-150
Sponsored by:
Sponsored by: Real Truck

F150 idle

Old Nov 30, 2010 | 02:57 PM
  #1  
Steel's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2009
Posts: 3
Likes: 0
F150 idle

Hey Folks

Got a rough idle issue for which your input is appreciated (2007, 4.6L)

*Bought it with 17,000 miles. It idled okay for a while then it began to have occasional rought idle. I had the dealer run diagnostics on two occasions (~21,000 and 30,000) and they found no vacuum leak no codes, etc. They reflashed the computer but it didn't seem to achieve much. It then was okay for about 6 months (after I had a shop flush the coolant system...which I assume is unrelated). Now (past 2 months), the old ghost has reappeared and it is getting annoying.

symptoms:
- while idling, it run perfectly
- once the temp needle approaches normal operating temp (i.e. straight up) the idling vibrations start.
- it is felt in the stering wheel, the seat, armrest, door, et cetera, with a strong vibration in the brake pedal
- it does this regardless of whether the AC or heater is on or it is in neutral or in "drive".

I change the air filter religiously. I ahve also done the normal fuel filter, PVC, etc maintenance.

Am I losing it or does it seem to be a function of temperature (does not overheat)...?
 
Reply
Old Nov 30, 2010 | 03:06 PM
  #2  
mdhawkin's Avatar
Senior Member
Joined: Mar 2008
Posts: 2,463
Likes: 0
From: Charleston, SC
Have you tried cleaning the MAF sensor or check EGR ports for blockage?
 
Reply
Old Nov 30, 2010 | 03:45 PM
  #3  
alexarizpe's Avatar
Senior Member
Joined: Jul 2005
Posts: 535
Likes: 1
From: sa texas
im having the same problem with my 04 4.6l how would i go about cleaning my MAF n where are the EGR ports located thanks.
 
Reply
Old Nov 30, 2010 | 03:57 PM
  #4  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
I can't link it right now but goto the " how to" section of the forum and there are some write ups in there.
 
Reply
Old Nov 30, 2010 | 03:59 PM
  #5  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Oh I almost forgot you might want to clean the TB also and replace the base gasket also.
 
Reply
Old Nov 30, 2010 | 04:18 PM
  #6  
alexarizpe's Avatar
Senior Member
Joined: Jul 2005
Posts: 535
Likes: 1
From: sa texas
i saw the how to on how to clean the MAF on a 5.4l im thinking its basically the same process just the MAF is located in a different spot. but cant find anything on the egr ports. thanks
 
Reply
Old Nov 30, 2010 | 04:36 PM
  #7  
mdhawkin's Avatar
Senior Member
Joined: Mar 2008
Posts: 2,463
Likes: 0
From: Charleston, SC
Originally Posted by alexarizpe
i saw the how to on how to clean the MAF on a 5.4l im thinking its basically the same process just the MAF is located in a different spot. but cant find anything on the egr ports. thanks
This should point you in the right direction.
https://www.f150online.com/forums/19...egr-probs.html

Not the same year/model but the concept should be the same.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 09:05 AM.