Two weeks ago I had OBX longtubes and custom side exit exhaust installed on my saleen. The exhaust still exits on both the passenger and driver's side in front of the rear wheels, uses two mufflers, and an Hpipe. That, coupled with a better tune, I was making 9PSI and made 417/456 at the wheels through 23" Wheels and a two piece driveshaft.

Well, that wasnt good enough. I had some Brenspeed detroit rocker cams installed and retuned. I picked up an additional 26rwhp and 17ftlbs of torque. The power curve looks like it just raised an inch across the entire graph. It looks like I picked up 25rwhp across the entire rpm band. The tuner had to take fuel out of the tune with addition of the cams. This is on a stock fuel system with 42lb injectors. I have a KB boost a pump, but didnt need it. I didnt lose any boost either....still making 9psi

working on getting a video

 

Seems like cams aren't worth it if you only picked up 26/17.

 

Wow, sounds beast. Which SC system are you using?

 

That's 26rwhp at nearly every rpm. Much different than peak someplace in the rpm range. The seat of the pants dyno is very happy. The looks from others when they hear a cammed 3v is almost worth it by itself.

I'm using the saleen sc with a 3.0 pulley

 

How much do those camshafts run you if you dont mind me asking?

 

They were 800 plus install. No springs or retainers required.

 

i know what you mean buddy i have the frpp hot rod cams and LOVE them im supercharging my truck after the first of the year.

p.s. i know what you mean when your idling around through a parking lot full of people and everyone stops and stares at you oh and vids or it didnt happen lol

 

Everywhere I turn. There you are Shane. LOL

Great numbers! I want a ride!!

RandyP

 

Randy, you will have to get one before I deploy!

Jeff took the truck home when he was tuning it. His wife loves it. You should have been at the Saleen meet in Bham last weekend. I would have taken you for a ride. Its great to make 23" wheels fish tail!

 

Easy on those pricey 23" tires big boy. LOL

Jeff worked on a Harley truck while at MPH. I remember watching it make over 700 on the dyno. I also watched the owner do a burnout out front.

These trucks can be Beasts! Yours is well on its way.

 

Can one of you guys post a video of the Cammed 5.4L 3v? Never heard one.

 

http://www.youtube.com/watch?feature...&v=DUhuEGcX4WU
Not a good quality vid I got a better camera now

 

x2, would like to see this, I am interested.

 

http://www.youtube.com/watch?feature...&v=AKr4BVNlAnQ
I'll get a better vid tonight

 

Thanks, that does sound good. Looking forward to the new vid.