you selling the tow hooks and bolts?

 

im not quite sure yet, i m droppin the truck off monday and should get it back by tuesday, i ll kno by then.

if i do sell them, $20 and

just pay the shipping and they re yours

 

yea just let me know ill get them for sure.

 

It's been said, but i'll add to it.

It wont fit without grinding/cutting. Not worth it IMHO. I had the 06 Roush spoiler sent to me and didn't notice until the front was taken apart and I was trying to line it up. PIA.

Had to send it back and have a 04-05 sent out.

 

thanks for the info man, but its sitting in my garage right now, so im on a mission to make it work lol

 

IDNC76- i put the tow hooks and 2006 Valence on my truck a year ago, but at first they orderd me a 2005 Valance it it didnt fit right with the 2006 bumper, there were large gaps around the tops where the valence met the bumper. so with my experiance i would think the 2007 valance would be too big for the 2005 bumper. but that just my 2 cents. good luck man!

 

I know someone on here has bought an FX2 valance (I think it was FATHERFORD, link), which is for an 06-up f150 bumper, and it fit an 04-05 f150 bumper. I bet an 06-up XLT valance without tow hook holes may work with some minor trimming, but I've never tried it.

 

more importantly, when are we going to see the pics of the bodylift?????

 

im bringing it in to the shop today (monday) and they said i should have her back by tuesday, so prolly wednesday, my day off, i ll clean her up and snap some pics

 

thanks again stealth,

i would assume all the 2wd valances were the same right

 

That's what I should have typed. :o

 

Hey IDNC,
First off, your truck looks sick! Nice job on all the mods!
Anyway, I know this thread is a few months old, but I figured this was the best place to ask. What kind of valence did you end up fitting on when you had the chrome bumper? I've got the same problem you had and I'm wanting to cover up my frame sticking out from under the bumper. Any suggestions?

Thanks!

 

thank you sir,

well, i used a cutting well and a grinder , and just cut a small portion of the part that was sticking out, i cut it on a diagonal and made a lil triangle, on each side of the frame rail, and through the center. then use the grinder, to smooth it out.

i used a valence from a 2006 + 2WD , the 04-05 valences have more "recessed" areas where the openings would be , but the 06 + sits nice and flush.
the majority of the bolts line up , with the exeception of 2 , but it looks fine

Before :




After : What Body Lift ???

 

looking good

 

SWEET! Thanks! I'm moving soon, but hopefully I'll be able to tackle this when I get settled. I'll have to shoot you some pics when I'm done.