Hello Everyone
You open a pic in your gallery, right click on it and select properties. Then highlight the address in the box and copy it. You go to a "reply" box and across the top, the next to last icon on the right, looks like mountains, open that. You then paste what you copied in the line. It will shhow up in the reply box.
__________________
Jim
Jim
You are welcome. Thanks on the wheels, just got them recently and I really do like them.
__________________
Jim
Jim
Even though its 4 wheel drive i would like to lower the whole truck a little, i only use 4 wheel drive in winter and at the boat ramp, never off road. havent seen any lowering kits for the 4 wheel drive, im sure they are out there.
i have a 2.5/5.5 i used thier 2.5/4 kit then removed the lifting hanger and used coilover shocks in the rear to get the desired hight
yep. You removing the blocks?
__________________
Jim
Jim
o yeah and the 4x4 has a lifting block in the rear stock, just remove those blocks and get shorter u bolts and youll be droped about 2" but that will only take you down to the stock 2wd hight so 2" shackles will get you about level
Thanks for the info, do you happen to have a web address handy. Thanks again!!
Thanks for the web address, do you think i could remove the rear blocks, install drop shackles, that would give me 4" drop in the rear and then just replace the front control arms with there 2.5 drop arms. would that work.
so with 2.5 arms and removed blocks and shackles you would have a 2.5/2 drop which would leave your rear higher then the front
so removing the blocks and adding the shackles will get you level with your current front suspension.....



