2004 - 2008 F-150

Questions... Rough idle and error code

Thread Tools
 
Search this Thread
 
  #1  
Old 01-05-2007, 04:41 PM
TeckBargins's Avatar
Senior Member
Thread Starter
Join Date: Aug 2003
Location: Southern Cali
Posts: 998
Likes: 0
Received 0 Likes on 0 Posts
Questions... Rough idle and error code

I know Ive had a few issues starting up, maybe a total of 7 times I have tried to start my truck and it doesnt turn over, so maybe this plays into my issue that started today.

So today all of a sudden when I come to a complete stop my 06 truck starts with a super rough idle. It is rough when Im stopped and the truck is in Park. But put it into Drive and it starts shuttering really bad. Then the CEL came on and would stay on when I restart my truck

I have an edge and was able to pull these codes off.

P0172 System too rich
Bank 1

P1000 on board diagnostic
obd systems readiness
test not complete

The only mods I have is edge evo and flowmaster 50 series. No intake or anything.

Any ideas?? I dropped it off at Ford at about 12ish.
 
  #2  
Old 01-05-2007, 07:11 PM
Quintin's Avatar
Technical Article Contributor

Join Date: May 2004
Location: Georgia on my mind...
Posts: 6,509
Likes: 0
Received 6 Likes on 5 Posts
Stuck injector(s) on bank 2.
 
  #3  
Old 01-05-2007, 08:38 PM
TeckBargins's Avatar
Senior Member
Thread Starter
Join Date: Aug 2003
Location: Southern Cali
Posts: 998
Likes: 0
Received 0 Likes on 0 Posts
Turns out it was a stuck fuel injector. Replace that and a spark plug.
$40 parts
$315 Labor
All covered under warranty! Wooooooo!
 
  #4  
Old 01-05-2007, 10:54 PM
Quintin's Avatar
Technical Article Contributor

Join Date: May 2004
Location: Georgia on my mind...
Posts: 6,509
Likes: 0
Received 6 Likes on 5 Posts
Depending on how badly the injector was hung up and how long the engine was run with the stuck injector, the bank 2 converter may be damaged as well.
 
  #5  
Old 01-06-2007, 02:55 AM
TeckBargins's Avatar
Senior Member
Thread Starter
Join Date: Aug 2003
Location: Southern Cali
Posts: 998
Likes: 0
Received 0 Likes on 0 Posts
what does that part do?
 



Quick Reply: Questions... Rough idle and error code



All times are GMT -4. The time now is 07:14 PM.