2004 - 2008 F-150
Sponsored by:
Sponsored by: Real Truck

35s to 37s

Thread Tools
 
Search this Thread
 
Old Nov 30, 2006 | 10:12 PM
  #31  
Trooks2001's Avatar
Senior Member
Joined: Jan 2004
Posts: 729
Likes: 0
From: Valdosta, GA
Originally Posted by patshea098
and trooks is on 36's on 6 inch fabtech.
If I didnt have the 2.5" level on top of the 6" Im sure I would have some rubbin b/c of the tire/wheel width I'm runnin. With the 8.5" I trimmed the valence a little and dont rub at all.
 

Last edited by Trooks2001; Nov 30, 2006 at 10:25 PM.
Reply
Old Dec 1, 2006 | 08:41 AM
  #32  
rsiler's Avatar
Senior Member
Joined: Oct 2005
Posts: 114
Likes: 0
From: Conway,AR.
Originally Posted by djh1121
I'm guessing you have a AAL or taller blocks in the rear? It looks like you are a little taller in the rear. Are you running fabtech shocks with a red boot? You’re not running a spacer on the front, correct?

BTW, good looking truck.
Well i think the picture is a little deceiving because it is on a hill so it makes the front look lower cause it really sits lower in the back and thats why i have been thinking about putting an add a leaf or some air assist on the rear cause i pull alot of heavy stuff with it and I sags pretty good with a load About the shocks to be honest I dont know what kind of shocks they are I bought the truck brand new from the dealer with the lift on it so I dont know what they did but I do now it dont have a space on the front cause I have rotated the tires Thanks for the complement
 
Reply
Old Dec 1, 2006 | 08:46 AM
  #33  
rsiler's Avatar
Senior Member
Joined: Oct 2005
Posts: 114
Likes: 0
From: Conway,AR.
Originally Posted by Trooks2001
If I didnt have the 2.5" level on top of the 6" Im sure I would have some rubbin b/c of the tire/wheel width I'm runnin. With the 8.5" I trimmed the valence a little and dont rub at all.
Hey Trooks that 2.5 level kit you have does it just have some spacers/blocks that go under the front springs?
 
Reply




All times are GMT -4. The time now is 06:22 PM.