Updated pics w/ 6" procomp, 3" body, 2.5" d.s. 2" add a leaf & 37's
Senior Member
Joined: Jul 2005
Posts: 742
Likes: 0
From: CO
Originally Posted by infantryscum
Thanks for all the good comments, to answer a few questions, the body lift is great, i haven't notice any unusual noses - handles good...get gap guards and most people wont notice the body lift, the 4.88 gears are very nice...i think ford undergeared these trucks from the factory...now it feels very torquey and around 2400 rpm @ 70mph on freeway, as far as how much lift was gained from the autospring - I know i picked up about 1.75" in the front because i measured before and after....i lowered the coilover collor approx .75" on the coilover, i did the rear add a leaf first and it was sitting stink bug....after putting the autospring on before lowering the coils...it was waaaay baja style....so after lowering the front coils, it sits perfectly level...and i am very happy with the wheel clearance (which is what i wanted and why i added the additional lift) only problem is somehow, my abs light has come on after the autospring install....cant figure it out....i will eventually...
As for the ABS light, I think that the speed sensors on the front and rear are kind of sensitive to work around. I had to replace one of mine after re-installing the offset version of the 2 incher. Just FYI.
Senior Member
Joined: Dec 2005
Posts: 158
Likes: 0
The trucks look great Infantry and Hotstang.
I haven't noticed any noises from my Bl but the truck has rode harder but I can blame that on the new 37's on 20's (put them on same day as the BL) rather than the BL, in hind sight my old 35's on stock rims rode like a cady, but I will take the hard ride anyday for the look the truck has now.
I haven't noticed any noises from my Bl but the truck has rode harder but I can blame that on the new 37's on 20's (put them on same day as the BL) rather than the BL, in hind sight my old 35's on stock rims rode like a cady, but I will take the hard ride anyday for the look the truck has now.
Suspended
Joined: Nov 2004
Posts: 17,079
Likes: 0
hotstang46
Just an idea, you might be able to find a tire store that will let you test fit a set of tires. I know shops around here have told me that they would let me test fit them. If they don't fit, get the 38x15.50s. Either way, it'll look great!
Just an idea, you might be able to find a tire store that will let you test fit a set of tires. I know shops around here have told me that they would let me test fit them. If they don't fit, get the 38x15.50s. Either way, it'll look great!
Thread Starter
|
Member
Joined: Mar 2006
Posts: 55
Likes: 0
From: RIVERSIDE, CA
HOTSTANG46,
In my opinion, you could run the 39.5's with my same setup.....that was something i was considering a while back...but i really like the way the fenderwell looks with a lot of tire clearance, so after my 37's wear out, ill go up to a 38" nitto mud grappler - max, unless by then they make a 38/20/15 super swamper irok- dont really wanna lose the power with anything bigger, but i think if i wanted, i could easily fit 39.5's right now with no trimming or other mods...go for it!
In my opinion, you could run the 39.5's with my same setup.....that was something i was considering a while back...but i really like the way the fenderwell looks with a lot of tire clearance, so after my 37's wear out, ill go up to a 38" nitto mud grappler - max, unless by then they make a 38/20/15 super swamper irok- dont really wanna lose the power with anything bigger, but i think if i wanted, i could easily fit 39.5's right now with no trimming or other mods...go for it!
Senior Member
Joined: Jun 2006
Posts: 344
Likes: 0
From: Indian Wells, CA
Originally Posted by ThumperMX113
hotstang46
Just an idea, you might be able to find a tire store that will let you test fit a set of tires. I know shops around here have told me that they would let me test fit them. If they don't fit, get the 38x15.50s. Either way, it'll look great!
Just an idea, you might be able to find a tire store that will let you test fit a set of tires. I know shops around here have told me that they would let me test fit them. If they don't fit, get the 38x15.50s. Either way, it'll look great!
never heard of that before...i will have to call around when my truck returns from colorado.....
thanks thumper
Senior Member
Joined: Jun 2006
Posts: 344
Likes: 0
From: Indian Wells, CA
Originally Posted by allrsdup
infantry - can u take a pic of your truck from the back so i can see qhat the rear bumper and hitch look like with the bl? thanks
hope this is what your looking for allrsdup...I had alot of underbody including my hitch powdercoated black though, but you'll get the idea.....
here it is from a distance......i think it really blends in and is not even noticeable, which is why i had it powdercoated...
Thread Starter
|
Member
Joined: Mar 2006
Posts: 55
Likes: 0
From: RIVERSIDE, CA
added pics to gallery
i added some pics to the gallery, ther is a pic of the rear end in there, check out all the updated pics and the huge superduty i caught driving around...it is next to me at a stop light in the pic...mind you my truck sits quite high...but compared to this thing....its just rediculous...check the pics in gallery!!!
Thread Starter
|
Member
Joined: Mar 2006
Posts: 55
Likes: 0
From: RIVERSIDE, CA
Originally Posted by hotstang46
OMG.....
that superduty actually has the iroks i want...lol
that thing looks absolutely stupid.....i don't even know what to say....
that superduty actually has the iroks i want...lol
that thing looks absolutely stupid.....i don't even know what to say....
hotstang46 ; your truck looks sweet....what size tires are you running right now? im looking to do a front bumper with fog lights...cause obviously mine did not come with it...not an FX4...but can it be converted??
Last edited by infantryscum; Nov 23, 2006 at 01:44 AM.
