Gonna start a new thread in the hopes that someone has some experience to share. Looking at putting 325/60/18 Nitto Terra Grapplers on stock 7.5" FX4 rims. I know it's been done, I just wanted to know how it worked out long term with tire wear, rubbing, etc.

Here's the previous thread https://www.f150online.com/forums/sh...5&page=2&pp=15

cheers

 

Good question. And not just Nito's. 325/60-18 has become a common size. I'm curious as to how the 325mm wide tires are wearing on the OEM 18x7.5 wheels.

 

BUMP! Im also in the same boat...

 

Ya... I have REALLY been thinking about doing this. Tire wear & the $$$ is holding me back. I do not wanna spend all that cash on tires, and they be worn in 10,000 miles!

 

If anyone has pics of a 325/60-18 mounted on their truck that would help out too.

 

https://www.f150online.com/forums/sh...excessive+wear

I read a thread that mentioned that their tires were wearing from the center a little faster than the edges also that the edges did not seem to contact very well(Visual??) I think it depends on how much pressure you run on them as well.

 

https://www.f150online.com/forums/sh...=325%2F60%2F18


https://www.f150online.com/forums/sh...=325%2F60%2F18

Here are a couple of threads with some pics and comments.

 

Check my gallery for pics. Only had them about 3 weeks now so not sure about wear im running them at 45 psi also.

 

Dude, those look bitch'n on your truck, thanks for the pics!