Amazing repair to screwed door panel!
This is the before picture of the hole that the ruined my door panel. The replacement cost was $525 cdn, and the installer is a good friend so i decided to give the repair guy a chance to fix it and if it didnt work out i could always replace the door panel later.
I taped the original piece back in just so you could see the repair job that was required.
Here is the picture of the repaired door in a full light with flash situation. You can barely tell where the hole was. With the door panel installed, you wouldnt know that my door panel ever had a problem with it. So for everyones future knowledge, If you end up screwing up your dash or door panel or one of the other 1000 or so plastic pieces on your truck, there is hope, and a much cheaper repair bill. The repair only cost me $75 cdn.
Later Trev
I taped the original piece back in just so you could see the repair job that was required.
Here is the picture of the repaired door in a full light with flash situation. You can barely tell where the hole was. With the door panel installed, you wouldnt know that my door panel ever had a problem with it. So for everyones future knowledge, If you end up screwing up your dash or door panel or one of the other 1000 or so plastic pieces on your truck, there is hope, and a much cheaper repair bill. The repair only cost me $75 cdn.
Later Trev
Originally posted by Mac-Ford Tech
Krazy, was it fider renew who fixed it? Mac.
Krazy, was it fider renew who fixed it? Mac.
Later Trev
RockPick, ThumperMX113 was bang on, the installer put the first hole in the door panel before double checking where the hole was in comparison to the dash. As you can tell he forgot about the dash which fits nicely along the raised door panel edge.
P.S. I wasnt allowed to clean it as he wants me to let the repair dry completely for a few days, then once i clean it and protect it im sure no one will ever know that it was screwed.


