Dealership told me the same thing when I inquired about it.

 

Yeah, on my 04 I can remove any code someone else put in but not the factory code. Go figure...

Hope the guy I bought it from has a short memory.

 

Wooo...back up johnny..put the gun down. Re-read his last post. He said he LOST the manual. LTFM

Someone getting upset with the boards lately

 

Shoot first, ask questions later.

 

Guys, before you kill each other, is there a way you can tell me to at least how to change the code since I lost the book? I have to buy another manual though now, I don't know who took it or where I placed it at.

 

You will need a factory code before you can program your personal code........time to go to the dealer

 

Your Owners Manual

http://www.genuineflmservice.com/default.asp?page=E4

 

KEYLESS ENTRY SYSTEM (IF EQUIPPED)
You can use the keyless entry
keypad to:
• lock all vehicle doors.
• unlock only the driver’s door.
• unlock all vehicle doors.
• program/erase the customer keycode.
• enable/disable the autolocking feature.
The keypad can be operated with the factory set 5–digit entry code; this
code is located on the owner’s wallet card in the glove box, is marked on
the computer module, and is available from your authorized dealer. You
can also create your own 5–digit personal entry code.
When pressing the controls on the keypad, press the middle of the
controls to ensure a good activation.
Programming a personal entry code
To create your own personal entry code:
1. Enter the factory set code (keypad will illuminate when pressed).
2. Within five seconds press the 1 • 2 on the keypad.
3. Enter your personal 5-digit code. Each number must be entered
within five seconds of each other.
4. After the code is entered, the locks will cycle, confirming that the new
code has been set.
Tips:
• Do not set a code that uses five of the same number.
• Do not use five numbers in sequential order.
• The factory set code will work even if you have set your own personal
code.
• If you set a second personal code it will erase your first personal code.
Erasing personal code
1. Enter the factory set 5–digit code.
2. Press and release 1 • 2 then,
3. Press and hold the 1 • 2 for two seconds. This must be done within
five seconds of completing Step 1.

 

thank you for the information!! I will give it a shot this afternoon!!

 

HOLT *****

Took 3 pages for the dude to get a good answer.

I can understand the bashing due to his FIRST post. (that was great BTW)