4.6 dyno
Thread Starter
|
Senior Member
Joined: Jun 2004
Posts: 2,457
Likes: 0
From: Central California
4.6 dyno
pic is a little blurry, but you get the idea 
190hp / 225tq, well for right now untill we can get a hold of dyno jet, it was acting funny and the numbers would be really messed up, so we will see what happens tomarrow hopefully. So when we do get everything fixed and working correctly ill get the sheets
190hp / 225tq, well for right now untill we can get a hold of dyno jet, it was acting funny and the numbers would be really messed up, so we will see what happens tomarrow hopefully. So when we do get everything fixed and working correctly ill get the sheets
Thread Starter
|
Senior Member
Joined: Jun 2004
Posts: 2,457
Likes: 0
From: Central California
well considering the fwhp is rated 231/293 it say it is pretty good along with tq (kinda) considering i am spinning a massive tire and wheel combo.
So technically auto tranny is 18% loss, and thats right where i should be at hp wise, and then tq is about 15ft/lbs lower but the tires and wheels can come into play a little with that one, but we will see what the pred does soon enough
So technically auto tranny is 18% loss, and thats right where i should be at hp wise, and then tq is about 15ft/lbs lower but the tires and wheels can come into play a little with that one, but we will see what the pred does soon enough
Senior Member
Joined: Nov 2004
Posts: 165
Likes: 0
From: Albuquerque, NM