2005 2wd lariat Scab

6" fabtech
325/60/18 nitto terra grapplers
18x9 moto metal 951c's
Air Force 1 intake
TP Xcal2
Billet grille

 

Gallery


Performance:
Flowmaster 50 Sido exhaust
K&N air intake
Edge Evolution

Exterior:
daystar 2.5 leveling kit
Mickey thompson 18x10 classic lock wheels
BFG AT 305/65/18
Silverstars in the heads, silverstar 9005 ultras in the fogs.
Silverstar amber turn signals

DEEZEE toolbobox
Xtang soft bed cover


Wilson whip CB Antenna
Antennex dual band Antenna
Antenex low profile 460 antenna


Bosh Icon Wipers 22" left 21" right.



Intierior:

Auxpod Ipod adapter
parrot hands free GPS
Aux in port in dash
Sirrius in ash tray
Icom ic-706mkII all band transiever.
Leather shift wrap
pro-fit mounts for two way / ipod /blackjack cell phone


Valentine 1 Radar detector w/ remote


I prolly missed something.......

 

Exterior/Performance:
20x9 Black Rhino Keros (35mm offset)
305/50/20 Falken Ziex STZ/04s
Bilstein 5100 Adjustable Shocks
HID Foglights
DeeZee Nerf Bars
ARE bed cover
BedRug
Line-X
Bed lights (installed under bed rails, attached to switch on ARE lid)
StreetGlow LED Brake light strip
Roush Grille
Offroad lights behind grille
Dixie horn
Mark LT Handles
SportTrac 4x4 emblem
Backup Camera
Silverstar headlight bulbs
Magnaflow SI/DO exhaust
K&N replacement filter

Interior:
Weathertech Floor liners
Kenwood 6x9s
Kenwood DDX 7015 with Nav
Kenwood iPod Adaptor
XM Radio
Edge Programmer
20% tint
Custom painted trim (Stevet from FTW)
Sub box from supercrewsound
Image Dynamics 10" sub
Kenwood amp
Heated Seats from heatedseatkits.com
Avital alarm and remote start
Billet cupholder rings
Leather shift wrap


Waiting on.....Outlaw Intake

 

thais0n, you should get some pics of hte bedlights.

 

Josiah, I am detailing it hopefully in the next few weeks and will take TONS of pics then.

 

New 15" shorty antenna to get in the carport

Reeption: B-

Looks: C-

 

6" Fabtech with 5" rear blocks
18x9 Helo Maxx 6's
35x12.50 Pro Comp Xtreme AT's
Xcal II & Troyer Custom Tunes
Air Force 1 Intake
Custom SIDO Exhaust
Bushwacker Pocket Flares
LT Handles
Billet Grille
Westin Bull Bar with 6" KC Slimlites
Undercover Tonneau Cover
Wet Okole Neoprene Seat Covers
XM Satellite Radio
CompuStar Alarm with Remote Start

 

2006 FX4 SuperCrew

2.5" Autosprings Leveling Kit
Volant CAI
Magnaflow SIDO Catback
Ventshade Window Wind Deflector (x4)
Univ. of Texas SS Emblem

 

2005 FX4 Supercrew
Black
Xcal 2
Magnaflow Exhaust SISO
Alpine IVA-W200
Sirius Sat. Clarion Calypso
Roush Hood Scoop
Billet Grille
Silverstars
Toddler Seat

 

Okay, here's the specs...

As purchased.
2004 F150 XLT Supercab 4x4
60/40 split bench seat up front, non power. (Exactly how I wanted it).
Lever operated 4x4, no pushbutton T-case here!
5.4L 3V V-8

Currently installed.
K&N filter element.
Gotts Intake mod.
SCT Xcalibrator2
PowerStop K1944-36 One Click Kit drilled / slotted rotors and HD Semi Metallic pads
AVS Bugflector and Vent Shields.
Ford Motor Company FX-4, XL, STX style bar grille insert. (I hated the honeycomb the XLTs came with).
Rancho QuickLift Loaded 2.5 fronts leveling shocks, and RS9000XL rear shocks.
Hercules Trail Digger MT 35x12.50/17 including matching spare under the bed.It's a tight fit, but it's all the way up there.
Pro Comp Extreme Alloys model 1089 17x9" Currently heavily coated with brake dust, LOTS of elbow grease and Mothers mag & aluminum polish is getting the mback go beautiful.
Hunter Truck Accessories black nerf bars. Getting ready to strip and recoat these. probably use Por15 on them.
Recon Line of Fire.
Unknown MFG black door edge moulding
Curt Class III / IV reciever hitch.

Not presently installed, pending reinstallation, or replacement.
Pro Comp 130watt Stainless Steel off road lights.
KC 2 light harness with relay. Switch custom mounted in dash. Almost looks factory.
Hunter Truck accessories black brush guard. This is to be replaced with a Go Rhino black winch mount brush guard and Engo E9000 winch.
Delta Steel Gullwing Crossover Toolbox. Removed permanently. Hated taking it on and off to put a slide in camper in the bed, so it stays out.
Radio Shack 40 channel SSB CB Radio. Need to build a custom mounting bracket and enclosure for a better than stock speaker.
Procomm assembled 18 foot 100% double shield, clear jacket RG8x with hand soldered Amphenol PL269s.
Procomm HD stud mount, center of toolbox.
Hustler C-29 Stainless Steel Pot Belly CB Antenna spring. The ends are plain steel and started rusting ater less than a month. Hustler's customer service has been HORRID, avoid these people if at all possible.
Radio Shack 102" Stainless Steel Whip.
Radio Shack Power Mic

Previously installed mods that have been upgraded away from.
EBC Greenstuff 6000 brake pads. Low dust, GREAT stopping power. These quickly replaced a set of Wagner Thermo Quiets. Not EVER going with those again... The Wagner TQs were what caused the serious brake dust problem in the first place, and they just didn't stop all that well. The EBCs were great, but were too pricey when I needed to do brakes this last time. Might want to go back with them if I decide I am not that crazy about the Powerstops.

Hunter black powder coated brush guard. Lower tube rusted through, and no provision for a winch, it goes bye bye...

Autospring 2.5" offset leveling kit. I am actually planning on stripping the finish and refinishing these and then putting them up for sale. I don't want to sell them all cruddy looking...

Wanted / Upcoming mods. Some of this is pipe dream territory, but most is actually pending projects I am working on, or trying to secure funding for.

ARB Air lockers front and rear along with compressor / plumbing with reservoir and milton connector for impact if needed.
Matching spare rim, and fresh center caps / locking wheel nuts.
Bushwacker Pocket Style flares (I was originally wanting EGR OEM look to get a more sedate look, but my wife insists on the pocket flares..)
Pro Comp 6" 130watt Stainless Steel off road lights. (2 more, and the harness upgrade to handle it)
Game hanger. (T-post gambrel type thing). Have the material to build it, need to get access to welding equipment, or someone willing to weld it up for me.
True Dual Maganaflow based stainless steel exhaust with high flow cats
Full Royal Purple treatment.
Leather seat conversion.
Wish I had caught the make / model, but AM/FM/Sirius/CD/DVD/mp3/wma/ogg/wav) head unit I believe it had the Garmin Nuvi nav built in .WAY not cheap.... Sony amp & Xplod speakers. Keep all the audio in the doors. I need my under seat space!
Custom reinforced and modded rear bumper, integrate 4" flood lights in the rear bumper wired to reverse light circuit, Proper CB Antenna mount that will clear a slide in camper.
High Output alternator to run the truck, lights, winch, radio etc...

 

04 F-150 FX4 single cab flareside
Airaid cold air intake
Flowmaster 2 chamber s/i s/o muffler
Preditor programmer
4.56 gears
6" Procomp lift
Procomp Xtreme A/T's 33x13.50r20
20x10" Moto's 951b
Westin Bull Bar
Offroad Unlimited diff cover
Deflector bug shield

Coming soon, Magnaflow catback system

 

2004 FX4 SuperCab - nothing fancy

• Draw-Tite Front Hitch
• Maglite mount on driver's seat front
• Heavy-gage wiring and plug in the grill, for 2-piece jumper cables, 600W inverter, and (someday) winch
• 2WD Low-Range mod: electrical mod that disengages front hubs while in 4WD-Lo to give 2WD-Lo
• UWS low-profile deep toolbox, with high-lift knockoff jack, 2-ton come-along, shackles, ****** strap, 12,000 lb tow ring, etc.
• 12V power port behind front license plate
• Draw-Tite cargo carrier & 'hitching post' for bikes, can carry three bikes on the front while pulling my pop-up camper.
• Thule roof rack bar and bed-mount bar to carry canoes, kayaks, ladders, etc
• Engine block heater

Check out my gallery for pics.

 

2006 XLT 5.4L SCab Flareside
Medium Wedgewood Blue / Arizona Beige Accent
Bedrug
Pace Edwards Full Metal Jack Rabbit Retractable Tonneau
AEM Brute Force Cold Air Intake
Magnaflow Catback Exhaust 16616
O.E. Splash Guards
O.E. Keypad
Coverking / Moss Motors Neoprene Seat Covers

 

04 F150 STX 4X4 Flareside

-20X8.5 XD Rockstars
-35X12.50R17 Nitto Mud Grapplers
-Custom Skull & Flame Paint Job
-6.2" Legace In-Dash
-Vertical Billet Grill
-Lower Bumper Billet Grill
-2.5" Leveling Kit

 

2005 lariat 5.4L Supercab 4x4

- Rize 8" lift kit
- Tuff Country 2" leveling kit
- 37x13.50x18 Toyo Open Country M/T
- 18x8.5 Ultra Type 185 Baja Champ
- Cabela's Tube Steps
- Hatchie Bottom Neoprene Camo seat covers front and back (mossy oak new breakup)
- Hatchie Bottom Neoprene Steering Wheel Cover (mossy oak new breakup)
- Tool Box
- Putco Grille Insert
- camo hood sheild (mossy oak breakup)
- camo window vents (mossy oak breakup)
- camo tail light covers (mossy oak breakup)
- edge evolution
- flowmaster super 40 si/do
- spray in bedliner
- grille guard
-16500 warn winch ordered 7/4
-cb
future mods:
camo fender flares, aal, 4.88 gears