I have a 97 f-150 with no High beams. tested all fuses and relays with a meter, all good. FTP stays on low beams when pulled back. When lever is pushed forward I loose L and H beams. Pulled MFS and tested. Have power to H and L when in the correct positions. When in H the switch cuts power to the L beams but retains power to the H beams but not to the lights. Also the dash indicator doesn't work. Not sure if it's a ground issue or in the MFS itself. Any help would be appreciated.

 

Bad head lights?? low beams only. Have you tried another head light that does work or new one.
Do you have power at where the head lamps plug in for the high beam side?

 

Bulbs are good.

 

No power to high beams even though there is power to the H beams at the MFS