Looking for some suggestions on the best way to fix this.
It appears a mouse ate my wiring harness to the computer.

Can I take the pins out of the existing connectors and try to splice the wire?
Do they sell a repair kit with wires and pins already attached?

Should I try a junkyard harness and try to splice it back in?


Any ideas are welcome.
Thanks!

2001 Ford F150 5.4 Crew Cab XLT




Wiring Harness Damage

 

Depends on how good you feel you are with this kind of project.
At the least, I would try to get a computer plug with 6 inches or more of lead or long enough to reach the farthest damaged lead in the main harness.
Fooling with the connector pins is inviting ongoing operating hassle without a pin extractor tool.
If a mistake is made you have to recognize what circuit is involved and go sorting it out again.
Good luck.

 

I'd typically recommend replacing if more than 6-8 wires are damaged.

Anything is possible, depends on your skills etc, patience, and motivation


If you have full coverage insurance you can claim it on your insurance