I have a 2001 super crew lariat with oe fog lamps or I thought I bought truck used and didn't have foglamps in but it did have the fog light headlight switch after finding the harness to left and right foglight I notice that it deAD ENDS THERES NO POWER DOES NOT CONNECT TO ANYTHING ITS JUST A DEAD END ..... HELP ME PLEASE

 

I'm going to resist the temptation to be an A-Hole and attempt to help, but I first I need to understand what you want and what you have. To help us understand, PLEASE use punctuation.

Are you saying you have the plugs in by the front bumper for the fog lights, but they aren't plugged in?

Also, it's really easy to hook up fog lights. You just have power and ground and polarity doesn't matter. A relay should be used, but hey, plenty of F150's have burnt to the ground anyway.

 

well thanks for restraining, I do have harness its goes to left side and the right side fog lights are hooked up. however the harness goes no where it stops under the windshield washer reservoir, the plug is round and I have looked every where I see nothing unhooked,

 

OK, now I understand. I'll try to go out to my truck today and see if I can tell where that harness goes to.

I'm not clear on another point. You say it has the OEM headlight switch with the fog light option? Did you add the lights in the bumper?

 

when i bought truck it had no front bumper or valance. I bought valance with fog lamps in it, because I saw the headlight switch had the fog light option when you pull out dial it illuminates the amber fog light icon

 

OK, that clears it up. I looked at my truck and the fog harness goes into a main harness and over the radiator to the other side. I don't see any sub harness with a round plug. Can you snap some pics?

 

yes sir it be tomorrow thou. thanks for all your help

 

im not sure how to add pictures on here.

 

Upload to photobucket or your online album, and just find the [img] tags and post the link here

 

Check your PM. Email me the pics and I'll put them up.

 

 

So in the first pic, is the harness that is running across the top of the relay/fuse junction connected to the plug hovering over the air filter housing? Did you pull that harness out of its factory location, or did you purchase the truck this way?