here is from the back....its too dark for a front shot right

 

looks good! how do those boggers do on the road?

i think you are the first f150 ive seen with them

 

Well it looks awesome

 

thanks guys!and well they are boggers.....haha not smooth at all and real loud which i dont mind cause i have a work truck so this is only a wknd ride i am about to order a styleline cowl hood and maybe paint the truck flat black or just a fresh black clearcoated haven't decided yet....what do yall think???

 

I have the same truck and yours looks great btw! But all you have is a 6 in?? And what size rims did you go with?

 

I ran 37x13.5's toyo MT's on 17x10 rims with -22mm offset. 6" fabtech lift and trimmed valance and inner fender.

The 37's in the rear had about an inch clearance to each side and if you put any more than about 500lbs in the back they rubbed the fender trim. Front rubbed if you were in a turn and hit a bump. If you go with the 6" lift and crank the t bars up in the front and add 2" blocks in the back then I could see it?

The fabtech list I had installed came with 4" blocks for the rear that were added to the factory 2" block so they were stacked.. doesnt seem like a 6" lift with only adding 4" to the rear? Not sure how that worked but I ended up adding an add a leaf to give it an extra 1.5" back there. If you do that and put a tapered 6" block you can clear them.

You can see the rub marks on the fender trim in this pic