Belltech 4/6 kit
Senior Member
Joined: Aug 2007
Posts: 1,867
Likes: 9
I was skimming through Craigslist last night and came up on a super good deal I couldnt pass up. A Belltech 4/6 lowering kit. It came with the complete front strut/spring combo in one piece. And the rear shocks with some kind of shackle. I have been googling Belltech 4/6 kit and cannot find the same kit with this shackle.Most of them come with the same looking shocks and springs, but blocks and U bolts, not the shackle I have...
I have a few questions before I decide to either use this, or sell it.
1. Will I need to cut and brace a section of the frame to use this 4/6 kit?
2. Where do these Shackles go?
3. Am I missing anything else? Anything needed to complete this 4/6 drop?
4. Will this kit work with both the 8.8 rear and the 9.75 rear?
5. Will this kit work with lighting suspension?[
I have a few questions before I decide to either use this, or sell it.
1. Will I need to cut and brace a section of the frame to use this 4/6 kit?
2. Where do these Shackles go?
3. Am I missing anything else? Anything needed to complete this 4/6 drop?
4. Will this kit work with both the 8.8 rear and the 9.75 rear?
5. Will this kit work with lighting suspension?[
here is a link with a parts list of the flip kit. I did some checking for you. that kit is for a 2005 or newer truck.
http://www.stylintrucks.com/parts/re...hb266440-.aspx
Last edited by 01 gt f150; Jul 17, 2013 at 07:35 PM.
Thread Starter
|
Member
Joined: Apr 2012
Posts: 32
Likes: 0
here's a shot of the strut tops and another shot of the rear flip perch. I agree after doing more research. I believe these are for 04+ F150's. I'll be throwing them up on here in the for sale section and craigslist since I traded my truck last week. Thank you for the help.
Last edited by sen2two; Jul 28, 2013 at 07:13 PM.
