97 f150 guages 4.6 engine
Thread Starter
|
Junior Member
Joined: Apr 2011
Posts: 7
Likes: 0
97 f150 guages 4.6 engine
i installed a different engine from a wreck anyway now my guages are acting up gets upto temp ok holds good oil pressure gas guage ok amps ok then oil pressure pegs out gas goes to nothing amp pegs out turn truck off restart normal again then it all starts over again already changed battery and alternator trucks runs good all the time no codes both trucks were running before no guage proplem
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
i installed a different engine from a wreck anyway now my guages are acting up gets upto temp ok holds good oil pressure gas guage ok amps ok then oil pressure pegs out gas goes to nothing amp pegs out turn truck off restart normal again then it all starts over again already changed battery and alternator trucks runs good all the time no codes both trucks were running before no guage proplem
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
Hard to understand without comma's periods.
Do you actually talk like that ?
Well, spellings fair, -capitals in the right places would help a little.
I'm not the greatest either, but at least I can break it up lol.
Do you actually talk like that ?
Well, spellings fair, -capitals in the right places would help a little.
I'm not the greatest either, but at least I can break it up lol.
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
No, you would have to pay me to teach you English. Chances are, you couldn't afford it. It may be cheaper for you to have a 9 year old give you a run down on forming sentences. It's a start.
Good Luck.
Good Luck.
Senior Member
Joined: Jun 2005
Posts: 2,805
Likes: 2
From: NEVADA
Let me translate:
I installed a donor engine in my truck and now my guages are acting up. ECT gauge gets up to temp ok, oil pressure looks good, fuel and amps are ok.
All of a sudden the oil pressure pegs, fuel goes to zero, amps peg.
Restarting the truck, gauges are ok, then the cycle start over again. I've changed the battery and alternator. The trucks runs good all the time with no codes. My truck and the donor were running good with no gauge problems before the swap.
Any help would be appreciated.
Trending Topics
Senior Member
Joined: Oct 2009
Posts: 216
Likes: 0
From: Central Connecticut
Your attitude isn't needed. He's only asking for help.
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
Let me translate:
I installed a donor engine in my truck and now my guages are acting up. ECT gauge gets up to temp ok, oil pressure looks good, fuel and amps are ok.
All of a sudden the oil pressure pegs, fuel goes to zero, amps peg.
Restarting the truck, gauges are ok, then the cycle start over again. I've changed the battery and alternator. The trucks runs good all the time with no codes. My truck and the donor were running good with no gauge problems before the swap.
Any help would be appreciated.
Holey Crap B, that's incredible! Your like,- Joe Cipher... Good job, I bet your close , if not right on.
On the flip side, I doubt the OP could make heads or tails of it.
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
Yes it is, I need it. 
If the OP was serious, IMO, he would of been considerate enough to use spell check, periods, comma's, capitals or what not. At least make it legible. He didn't even try.
If the OP was serious, IMO, he would of been considerate enough to use spell check, periods, comma's, capitals or what not. At least make it legible. He didn't even try.