my new seats
Thread Starter
|
Senior Member
Joined: Aug 2008
Posts: 1,118
Likes: 0
From: Omaha, NE
Thanks!
and you too migdaddy!
I forgot about my signature update, I'll get on that too!
jmo1112, I believe a 60-40 will drop right in. As for the buckets, the wiring is not a big deal, really. One green wire for power, one black wire to ground. There are a few extra wires that you won't need. I had a power wire already in place, as my amp used to be under drivers side with my 60-40. Had to move my amp due to the power seat motors under the new seat.
and you too migdaddy!I forgot about my signature update, I'll get on that too!
jmo1112, I believe a 60-40 will drop right in. As for the buckets, the wiring is not a big deal, really. One green wire for power, one black wire to ground. There are a few extra wires that you won't need. I had a power wire already in place, as my amp used to be under drivers side with my 60-40. Had to move my amp due to the power seat motors under the new seat.
Senior Member
Joined: Feb 2011
Posts: 167
Likes: 2
Hey Jump, I opted for the Expy buckets and console. Just pulled them today. I know you already had power under there from your amp, but would you happen to have an idea what I should run my power to for the seats (like under the dash?)? Thanks... and your setup looks great, btw.
Senior Member
Joined: Jun 2007
Posts: 987
Likes: 0
From: Fenton,Missouri
looks real good! I would love to do the expy console/buckets for my 02 screw. I currently have leather and would love to change all my seats to tan cloth!! My leather gets soo freaking hot here in STL w/ the humid summer and on top of it I have a dark blue truck!!! Plus I just prefer cloth over leather