well i have my dash apart and i was lookin at the cluster and pulled out my dead lights. i figured since i had the dash apart and most of my lights were dead, i would put some blue LEDs in place to match my headset. my question is, do they make LEDs that'll go in place of the stock bulbs? or do i gotta pick up some LEDs and solder them into the little plastic connectors?

 

yes they do.. i pretty sure they are 194's.. http://www.superbrightleds.com/

 

you can buy a led bulb to replace stock bulb

 

SWEET!! anyone know exactly which bulb exactly it is? link would be great, im not good with electronics lol

 

ford4life posted link i think mine are 93or94

 

to find your bulb size

http://www.sylvania.com/ConsumerProd...lacementGuide/

 

or you could search:

https://www.f150online.com/forums/ar...r-97-03-a.html

 

haha i actually found that last night. only question (dont wanna bump that thread), in the "things you need" part it says you need like 2 other little LEDs (2x 74 (aka 37/73) LEDs) what are they for?

 

the 2 white bulb holders in the center
194 bulbs use the black bulb holders

 

the two tiny bulbs illuminate the top of the speedo and tachometer (if you have one) where the 194's wont reach

 

alright next question, anyone know where to get replacement holders? i lost one....

 

junkyard
or
those red "HELP!" blister packs in every parts store
or
this place has LEDs already mated to the twist lock base:
http://www.superbrightleds.com/cgi-b...nstrument.html

 

wow, you just read my mind like a freaking book. i was going to say the same 3 exact things!

 

ok thats great!! they make twist lock ones... now which ones do i need... i need the ones that twist into black... and the ones into white... which ones on the site are they? HELP!

 

I'm not sure any of those are the ones you need actually