hose on VMV to Intake manifold-Replacement
Thread Starter
|
Senior Member
Joined: Jul 2007
Posts: 448
Likes: 0
From: Springfield, USA (DOH!)
hose on VMV to Intake manifold-Replacement
Just wondering if there was a better replacement for the hose between the vapor management valve and the intake manifold hose. I replaced the hose 3-4 years ago, now it is breaking down and cracking again. anyone else used anything other than a direct factory replacement or just some fuel vapor vent hose???
Reason is, i was checking under the hood for vaccum leaks, and found that hose leaking. Oh well, I guess 3-4 years isn't bad for a piece of hose I got for free!!!
Reason is, i was checking under the hood for vaccum leaks, and found that hose leaking. Oh well, I guess 3-4 years isn't bad for a piece of hose I got for free!!!
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
That's your EvapEmissionReturn line. Runs from the plenum to your EEP valve on the firewall. I think that's what your referring to.
Replace with the same line. Fuel Vapor for EVAP system. Ordinary hose will collapse and suck shut.
Replace with the same line. Fuel Vapor for EVAP system. Ordinary hose will collapse and suck shut.