rear seat
#1
#2
#4
Each side should be hinged? On my 99 they are. 60/40 splt and when you fold them forward, the 60 side has 3 hinges and the 40 side has 2 hinges. But there is the bracket/mount that they hinge too. That is all one piece. So you can remove the seat but not the lower portion. Unless you get crazy. I just got done cutting my 60 side down to a 40, so now its 40 and 40 with an empty space in the middle so I could build a 2.5cf enclosure. I have a spare seat so if I ever want to change it back, I just have to pull it from the hinges and swap them.
There was a lot of work involved that you cant see, including cutting the seat foam, cutting the back plate to match, cutting and welding the sub frame inside the seat, stitching the fabric back... etc.
And the sub box in the making. Houses a 12" L5 rear facing, port tuned to 33hz. I have a finished product, just no pics yet. Maybe tomorrow.
There was a lot of work involved that you cant see, including cutting the seat foam, cutting the back plate to match, cutting and welding the sub frame inside the seat, stitching the fabric back... etc.
And the sub box in the making. Houses a 12" L5 rear facing, port tuned to 33hz. I have a finished product, just no pics yet. Maybe tomorrow.
Last edited by Toyz; 05-16-2010 at 12:13 AM.