F150online Forums

1997 - 2003 F-150

A Quick brake Question?

Thread Tools
 
Search this Thread
 
Old Nov 10, 2009 | 06:58 PM
Share
  #1  
Layedout02's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2009
Posts: 120
Likes: 0
From: kentucky
A Quick brake Question?
ok i put new front brakes on at 65k now im at 73k, when i put them on i did not turn the rotor, now its time for rear ones, should i turn the back ones, and should i put new fronts on and turn the rotor
 
Reply
0
Old Nov 10, 2009 | 11:04 PM
Share
  #2  
f150fella08's Avatar
Senior Member
Joined: Feb 2008
Posts: 4,637
Likes: 2
From: Pittsburg, Texas
if they dont wobble when you hit the brakes, then i wouldnt turn them.
 
Reply
0
Old Nov 10, 2009 | 11:12 PM
Share
  #3  
Bluejay's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Mar 2005
Posts: 26,080
Likes: 85
From: Burleson/Athens/Brownsboro, TX
I never turn them if there are no grooves on the surface.
 
__________________
Jim
Reply
0
Old Nov 11, 2009 | 07:14 PM
Share
  #4  
Layedout02's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2009
Posts: 120
Likes: 0
From: kentucky
Yea it dont need front brakes but they are groved real bad, im turning the back ones when i replace them
 
Reply
0
Old Nov 12, 2009 | 03:30 PM
Share
  #5  
maddoughboy's Avatar
Senior Member
Joined: Jul 2007
Posts: 482
Likes: 0
From: WA State
You shold turn the rotors but go to a shop not a parts store. Unless your front are haveing issues then just run them as is tell you need new brakes.
 
Reply
0
Old Nov 14, 2009 | 04:02 PM
Share
  #6  
glc's Avatar
glc
Senior Member
15 Year Member
Veteran: Navy
Veteran: Reserves
Joined: Dec 2006
Posts: 43,542
Likes: 819
From: Joplin MO
If you put new pads in with grooved rotors, you will need to replace the pads again if you turn or replace the rotors.
 
Reply
0
Old Nov 14, 2009 | 04:17 PM
Share
  #7  
Patman's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Aug 2005
Posts: 21,337
Likes: 159
From: DFW
i havent turned the rears on either of my trucks when i put pads on because its a solid rotor (non vented) so it doesnt really warp. Just make sure the rotor isnt heavily grooved.
 
Reply
0
Back to Subforum
1997 - 2003 F-150
View Next Unread
Need some Ford part numbers--axle seals & bearings




Advanced Search

All times are GMT -4. The time now is 05:38 AM.