^^^Looks awesome man!! Always nice seeing more pictures of other peoples.

 

I should get on this.

 

Np man looks great

 

heres the link buddy https://www.f150online.com/forums/19...witch-mod.html

 

What type bulbs are the ones used in the light switch?

 

If I remember correctly it is just a 3mm LED, You have to wrap it around the light holder thingy yoursaelf.

 

Thank you sir!

 

i used 5mm actually

 

I have to ask, all these years I've had my truck I've never seen the selector switch illuminate, nor the fog light indicator panel light up. Do these have bulbs or not?

 

The pic above is how it liights up, However it is (from the factory) Green and the Indicator for Fog On is a amber colored fog light pic and for autolamps if you have them is a simple little amber dot under the autolights timer dial.

 

Lame, you'd think theyd put a light under the dials, indicators, and position labels, not just position labels.

 

Agreed, I thought the same thing, I even looked at a switch I had apart to try and figure out how to get the light on the dial, to no avail though.

 

well thx for this write up haynes just told me to get a new switch because my bulb shorted out like really bad i believe not 100% shure what on my switch is bad but it helped alot with the taking apart... but mine is a 99 and it's more like the first but i also have auto lights... so not sure if they used to different switches on all models... but thank you very much...

 

It looks great,i want to do the same thing to my 2003 f150 supercrew 4x4.Just need to know what sizes of leds and how many i need to do the job rite the first time.

 

Hey I'm sorry I tried to do this I got the 3.7 20mah blue led and the 680 resistor

I am missing something I been thru 2 LEDs and they only last about 2 minutes each and die

I find the longer positive lead and I attach it to one end of the resistor and the. The other end of the resistor to the wrap around part of post and my negative lead goes around the other contact of the post but seconds to minutes later poof the led dies?

I have found the bottom of my contacts for where the post attaches is the positive I'm actually descent with electronics and what not but I'm stumped by this one ?