News Archives - Page 22 of 22 - F150online.com

Tag: News

V6-Powered F-150s Sold Well Last Month

V6-Powered F-150s Sold Well Last Month

The fact that 75 percent of the engines Ford offers in the 2015 F-150 have six cylinders in them makes the following revelation a little anti-climactic: two out of three F-150s the Blue Oval sold in May had V6s in them.

By: | June 4, 2015


All-New 2015 Ford F-150 Will Sell For $26,615

All-New 2015 Ford F-150 Will Sell For $26,615

  Good news for Ford fans.  A 2015 Ford F-150 XL will cost $26,615 and the XLT will sell for $31,890. That’s only $395 more than last year’s models. Reuters reports that the 2015 Lariat F-150 now starts at $39,880, the King Ranch F-150 at $49,460 and the Platinum version at $52,155. Not too shabby […] More »

By: | July 29, 2014



Ford Sells 500,000th EcoBoost F-150

Ford Sells 500,000th EcoBoost F-150

Only three years have passed since Ford first introduced the world to the EcoBoost F-150. At the time, it was a risky move. People were skeptical of the EcoBoost’s reliability under the heavy stresses of pick up truck duty. They were worried the plucky little 3.5-liter V6 wouldn’t be a viable alternative to the V8. […] More »

By: | May 6, 2014


Dealerships Wary of Low F-150 Supply

Dealerships Wary of Low F-150 Supply

The new F-150 is coming (eventually), which should make dealerships around the country absolutely thrilled. In the short term however, there’s a worry that there won’t be enough half-ton goodness to go around. As Ford switches from the old to the new, there’ll be a lull in production. Some dealerships have asked for more than […] More »

By: | December 27, 2013


First Ford CNG F-150s Roll Off Assembly Line

First Ford CNG F-150s Roll Off Assembly Line

Ford has been talking bout building their own CNG truck quite a bit over the past year or so. Finally, the first CNG equipped F-150s direct from ford have begun rolling off the assembly line. The trucks will come with a variety of upgrades to allow for duel fuel operation. Hardened valves, pistons and piston […] More »

By: | November 25, 2013



All times are GMT -4. The time now is 03:32 AM.