Well I just had to do it again. Same great Roush work. BABoltII gets some air out of the wheel wells. In by 9:00 AM out by 5:00 PM.



------------------
BABolt
SVT#290



[This message has been edited by BABolt (edited 09-25-2000).]

 

Hey dude...if I visit the cousins up in Michigan...one of them works for GM Truck and Coach and the other one for Lear (seat designer) how much is this lowering extravaganza gonna cost....thanks..jw

 

So what's the total drop now from stock ?




------------------
2000 Red SVT Lightning
Superchip R9+
Spray-in bedliner
Snugtop Snuglid
Tinted side windows

 

BA
You just have TOOOOOOOOOOOOOO much time on your hands!

------------------
$$$$$$$$$$$$$$$$$$$$$$$$$
PFA
'99 WHITE LIGHTNIN'
#0873--1 of 866--
RHINO, LoJack, Valentine 1, Mobil 1
Single Blade T-Body
Phantom Boost gauge-#5707
Phantom Water temp. gauge-#5737
Dual pod for pillar-#15303
Plasma Super White headlight and foglight bulbs

2000 Mercury Villager Sport

 

$700.00 installed. 2 inch drop all the way around. The ride feels good, took some of the harshness out of the rear.

------------------
BABolt
SVT#290

 

BABolt, I would like to get some of the harsh ride out of my L but I do not want to gieve up too much handling. How does the Roush set up compare to stock handling wise( lean in the corners and ride harshness)?
What does $700.00 get you in the way of hardware, springs, shocks, sway bars ect.? Thanks.

 

700.00 is a steal of a deal...Steeda has a kit and is reputable...BaBolt will Roush sell the kit?...and yes...good question..what does it consist of..lata..jw

 

UUGGHHHHHH!!!!!
I had to settle for the BellTech 3/4!!!! Ford and Roush wants to charge me $1500.00 just for the kit...

BaBolt: Sweeeet! You da' man!


------------------
Rich
1999.5 SVT Lightning - Red. 100HP Shot NOS, Super Chip(TRAC). K&N Filter. Viper Alarm w/remote start, Sir Michael's roll pan, smooth corners and steps w/billet inserts, clear corner lenses, Cervinis Ram Air hood, ARE Cover w/ wing, Momo billet pedals, cd changer, cover, Phantom boost and nitrous gauges, MTX Thunderform w/ 2 10" MTX Thunder 4000 subs. 5-channel 500w. Clarion amp.(APA5241), (4)Polk Audio 3-way, 130w. DX 7's, Color-matched Muth signal mirrors, Soundproofed cab, BedRug, AIM 2" Drop, Trenz billet grills, Piaa 9007 Super Whites, etc. Build #2755
TampaSVT@Tampabay.rr.com

http://home.tampabay.rr.com/tampasvt...cs/SigPic1.jpg

2001 PT Cruiser - Limited Edition
1999.5 Expedition XLT



[This message has been edited by TampaBayLightning (edited 09-25-2000).]

 

700.00 soundz like it is less the shocks...is it BaBolt?....say what?

 

It gets you the Roush springs installed at all four corners and an alignment. I passed on the Bilstein shocks. The handling is excellent and I know of no one that has gone this route that has a complaint.

------------------
BABolt
SVT#290

 

Well...Steeda has the kit for 410.00. It lowers the Lightning 1 inch front 2.5 inch rear....Steeda also sells the Edelbrock IAS shocks...they use a special length for the rear due to the drop..so beware if you buy from Summit...Steeda is proven..I would jesture to say Roush is proven...will Roush sell the kit?...Bilstein's..stay away from them..they are rough..rough..rough...I had them on my '98 Z-28...Steeda will not use them either...Steeda been around awhile..lata..jw

 

Well...Steeda has the kit for 410.00. It lowers the Lightning 1 inch front 2.5 inch rear....Steeda also sells the Edelbrock IAS shocks...they use a special length for the rear due to the drop..so beware if you buy from Summit...Steeda is proven..I would jesture to say Roush is proven...will Roush sell the kit?...Bilstein's..stay away from them..they are rough..rough..rough...I had them on my '98 Z-28...Steeda will not use them either...Steeda been around awhile..lata..jw

 

BABolt thanks for the info.

 

Whitelightnin'-
What's the deal with the Steeda kit? I tried their site, but it sucked. Too slow because of too much unnecessary movement. Anyway, the 1 / 2.5 drop sounds like what I'm looking for, but I didn't see it on their site. The only one I saw was for the Gen 1s. Any help or info is appreciated. BTW, do you have the Steeda kit and (if so) did you do your own kit or did you have someone else install it for you? If you did it, how hard was it?

DUCK

------------------
November 18, 1999 We will not forget.
The fallen 12 will live in our hearts forever.
Fightin' Texas Aggie Bonfire 1999

 

mike, i guess babolt2 will be getting the hand me downs. the truck looks good. stan got in his lower a-arms, they look real good, should be lowering it soon. for all interested he(stan) went with a 2" shackle and western dropped a-arms to get it down 2"& 2", i'll post photos of the operation sa we do it.